Search results

Hi All, Can some one please help me as i have got a fault with the heater controls on the dash. When i start the disco it turns on in auto mode, which is set to 22 degress and i have tried to find out how i turn it off auto mode ??, but if i turn it on via the on button it all works as normal...

Hi Sierrafery, Sorry my mistake not knock sensor , fuel cut off switch fitted to the bulk head. Replaced the battery with a fully charged battery 12.76 volts and i all so connected a jumper pack just to make sure there was enough power for the fuel purge and the cranking side of things. Thank...

Hi All, another update about my TD5. After all the work have been done the bloody thing will not start. Replaced crank sensor checked and cleaned injector loom plug, also checked ECU plugs for oil ingress (cleaned) . Checked all pins in plugs for corrosion (none found) and also checked knock...

Hi All, Just wanted to give you a update on my TD5 running issue. Right here go's : Replaced second fuel pump in tank with brand new pump, then replaced fuel filter with new one and also cleaned fuel lines. Replaced fuel line from the pressure regulator and also replaced fuel pressure regulator...

OK thank you for your reply, i will give this a try tomorrow night and let you know.

Hi All, i need help with my running issue on my D2 , driving along the M5 cut out and would not start cranking over still no start. Called the AA got recovered home and tried to start it again and finally it started and then cut out and would not start again, could not hear the fuel pump ?. Made...

Hi fazer, i have had the same issue with my flip face stereo, look for the power antenna wire ( may be blue wire). Look at the power plug next to the red wire is the amp power up wire try connecting to that and see how you get on . You may need to fit a suppressor to get rid of the back ground...

Hi All, I'm in need of some advise please, i am trying to install a turbo boost gauge on my TD5. I need advise on where to connect the gauge to on the turbo, as i have been told lots of places to connect it too. Thanks in advance Shaun