Search results

Is it possible to replace clutch retracting spring assembly without first removing pedal box, if so how? Tia

Having similar issue, is your pedal box the one with a spring on the outside of a plastic type sliding tube type, if so how did you replace the spring assembly

Looking for recommendations for a reasonably priced scanner for my freelander 2 Tia

Ok tried bleeding clutch conventional way with no success lost all pressure, cobbled up a syringe and pipe and tried from slave nipple never bled anything this way before and it took a lot of effort but success now have a spot on pedal, the fluid that was pushed into master cylinder was black...

Thank you for your reply, had the clutch checked out by local land rover specialist he thinks replace pedal box as he cannot see issues with hydraulic systemn but looking again at pedal assembly the retracting spring seems to go over centre instead of stopping pedal at correct height, appreciate...

Well just been out for a drive in the car and now pedal is back to normal!!!, master cylinder maybe?

Familiar with freelander 2 having owned 2, there were no issues when I bought the car just happened yesterday after car had been unused for a couple of weeks

Recently bought my second freelander 2, 2014, 70000 mls, clutch seems good biting point ok no issue changing gears but on release of clutch it stops approx 20/30 mm from top then springs back quite hard, help would ne appreciated

2013 freelander 2, does anyone know part number for air con sealing rings please, looking on eBay several different part numbers say freelander 2 Help appreciated

Before i fitted new battery i connected positive and negative cable from car battery connections to a slave battery on completion of fitting new battery i have not had to reset windows or clock Thanks for all replies

Thanks for reply

Hi, freelander 2, wanting to fit a new battery to my 2013 freelander TD4, when I have fitted it do I have to have the battery monitoring system reset or does it reset itself Help is appreciated

13 plate, freelander, Replaced rear pads and decided to renew brake fluid ezee bleed fitted bled rears no issues, come to the front bleed nipples seem odd size 8 mm spanner to small 9 mm to big? Do I need special spanner ?? Interested in your thoughts or recommendation

Thanks, I have one that I used on my vintage tractor

Thanks, genuine filter ordered

Diagnosis showed no faults

Freelander2 usually when towing in slow moving traffic oŕ stationary foŕ a while the engine power drops and will not go above 40mph until in free moving traffic for a couple of miles and all returns to normal, no warning lights or raised temperature gauge, wether coincidence or not has only...

Replaced master cylinder all good now

sorry freelander 2, 2013 td4