Search results

One note.Do take real care when reassembling your parking brake module to make sure the wire routing for the manual brake release cable is cleanly laid in track when you screw down the Motor after replacing the plastic gears.Make sure the wire fits in curved track in plastic body it does not...

Hi update . Had car recovered by my breakdown to my local 4x4 Durham excellent service £66 later. Hose attached to turbo ,clip loose so was fuel leak. Codes cleared found break bulb out reset and happy customer. Now I need to focus on other problems rear control arms need doing and suspension at...

On Icarsoft getting fault fuel rail system pressure to high

Yes oil / liquid looks clear and is not black. Managed to reset fault codes but parking brake still had error so I went back and removed the parking brake module to check the routing of the release cable and found I had not set it in the curved track under the Motor. Put that right and reset...

It is definitely a rattle

Added YouTube clip below should work now .

So going at it from two points . I have the fan out and am ready to look in that direction but first I have taken off sump cover to see if I can track the oil leak . I have attached a rough video . What is the black plastic 3inch cover above the front diff in video it is covered in the oil . The...

Took your advice not a lot to loose at the moment went for my tap spanner for difficult taps and 10mm on fan mount with 19mm locked in to stop it rotating and it came off first pull !!! Now off to find a 7mm spanner for all of those fixings before I go any further

Is there a way of checking if oil pump has failed without stripping out fan and can cover? It looks like a trip to buy tools if I have to do that

Plot thickens. On start up car sound like a bag of nails and on inspection oil leak from front right off side of engine. Wondering if frost has got the oil pump. My house boiler was frozen this week. This car is testing me!!!

Hi icarsoft v2.0 arrived today. Load of codes flash up p0091 p0088 p0191 U0401 u0184 b1b74 b1b75 b1 b1b76 c1a53 parking brake control u0100 u0401 u0416 b1d21 b1c62( this one will not cancel) Had a go at resetting all of these but the reappear on start up any ideas where to start?

I ordered the I hope that will be good enough ICARSOFT LR V2.0

Just ordered a code reader so let you know when it comes .

Hi new to site . I have a 56 discovery 3 with exact same problem . Did you fix yours and how? I have stripped out module and replaced warn gears and replaced with new discs pads on rear and adjusted but getting the flashing parking light and hdc fault . Gears move four times then quiet. ...