Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. bostjanpisler

    Disco 2 TD5 stalls above 2,5k RPM

    Thanks for the links, particularly the first one, will have to check once I get it home since I don't have the required tools here. Meanwhile, I'll try to just bypass the modulator straight to the actuator, so I can get it home.
  2. bostjanpisler

    Disco 2 TD5 stalls above 2,5k RPM

    Update: changed the actuator and modulator and it still goes into limp mode when under more load. Looks like the actuator still doesn't move when I rev it in place. Any other ideas what I could look at?
  3. bostjanpisler

    Disco 2 Left air suspension keeps blowing up

    Thank you for the help, I've ordered the part and will attempt the change this week!
  4. bostjanpisler

    Disco 2 Left air suspension keeps blowing up

    Thanks for the input, seems like an easy enough change so I'll replace it to avoid the airbag exploding again on my way back. I'm reading that if you disconnect the battery when replacing the system doesn't need a re-calibration, is that correct? If that's not the case I'd need to leave it and...
  5. bostjanpisler

    Disco 2 Left air suspension keeps blowing up

    I've had my rear left air suspension blow up twice in a row after driving for a longer period (~3-4h), driver + ~100kg in the trunk. I have a hunch it's due to heat from the exhaust which goes past the bag. Is it possible my disco is missing some heat shield there? I tried googling the...
  6. bostjanpisler

    Greetings from Slovenian in Switzerland

    Went up some epic stuff, disco had to wait below :D
  7. bostjanpisler

    Disco 2 TD5 stalls above 2,5k RPM

    Ok progress, tried this with a friend and it does not move when we rev it high. Now just have to figure out if it’s the actuator or modulator. Any ideas how to eliminate actuator, probably easier? Don’t have an air compressor at hand.
  8. bostjanpisler

    Disco 2 TD5 stalls above 2,5k RPM

    Update Took the gas pump out and the bottom seemed completely fine, attached image. The wastegate lever on the turbo moves fine if I disconnect the actuator and move it by hand. The actuator I can't test outside of trying to move it with my hand which I could just slightly, but it moves. The...
  9. bostjanpisler

    Disco 2 TD5 stalls above 2,5k RPM

    Thanks for the quick input, I guess it could be multiple problems because the waste gate things sounds about right, not sure why it’s not starting up right away afterwards as mentioned, this could be the other thing. Can’t connect to diagnostic here, will try to clean the strainer at the pump...
  10. bostjanpisler

    Disco 2 TD5 stalls above 2,5k RPM

    Hi all! My Disco 2 "99 TD5 keeps stalling when driving if I rev it past about 2,5 or 3k+ RPM. If I try to start it up again afterwards it starts for a second and dies. When I try again after about a day it starts and runs ok. - Fuel pump was replaced about 8 months ago, but did only about 5k km...
  11. bostjanpisler

    Greetings from Slovenian in Switzerland

    Hi, joined to get some help with a Discovery 2 TD5 I've purchased recently. Cheers from Slovenian currently staying in Swiss alps.
Back
Top