Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. shawn191

    disco 2 mirrors

    Ok thanks for the info ,i thought about 90 mirrors but its mounting them with out making it look like a bodge job ,if i sort the prob out ill let you know . Thanks shawn.
  2. shawn191

    disco 2 mirrors

    hi everyone !! I do alot of towing and find my disco 2 mirrors are not as good / big enough as id like them to be !! Id like to fit some permanent bigger mirrors on . Anyone done this or have any knowledge of what mirrors would fit with out looking like a bodge job Thanks shawn.
  3. shawn191

    Disco 2 3 amigos where to go next ?

    Thanks for the tip ill give it a try . Thanks
  4. shawn191

    Disco 2 3 amigos where to go next ?

    Ok thanks so do you think its probably sensor and hub then? Are the non ome hubs ok ? As they are a lot cheaper than landrover!
  5. shawn191

    3 amigos where to go next ?

    Hi thanks for the welcome
  6. shawn191

    Disco 2 3 amigos where to go next ?

    I got a solid 1122 ohms which abs buffs said needed to be between 800 - 2000 as a genral rule of thumb ,but im only going by what ive read so could be wrong ? Fault said i had 1.28 impedance L/H where as R/H read around 3.90 and backs read around 9.00.
  7. shawn191

    Disco 2 3 amigos where to go next ?

    Yh been on for couple of weeks ,but thanks for the heads up ill bear it in mind thanks.
  8. shawn191

    Disco 2 3 amigos where to go next ?

    Hi thanks for the info ,ive had another go with my scan tool and found a fault in the sensor readings ,says the impedance on L/F wheel low ,so i checked the sensor with ohm meter at plug under bonnet and says sensor good . and to be honest it looks new im not that good with electrics so im abit...
  9. shawn191

    Landys you either love em or hate em

    Landys you either love em or hate em
  10. shawn191

    Disco 2 3 amigos where to go next ?

    Hi everyone im new here ,have the usual disco problem (3 amigos) Has had shuttle valve wiring bypass done ,and no faults showing up on the diagnostic, but the lights are still on ,also have amber ace light on but seems to work ok ,has anyone had this problem or knows how to rectify it ? Any...
  11. shawn191

    3 amigos where to go next ?

    Sorry new to here and getting abit confused trying to understand the posting navigation Thanks shawn.
  12. shawn191

    3 amigos where to go next ?

    Have 1999 discovery 2 td5 . Have the common problem with the 3 amigos, have done the shuttle valve wiring bypass but lights are still on but no faults showing on diagnostics, also have the ace light on , has anyone had this problem or what to do next ?
  13. shawn191

    3 amigos

    hi ive recently purchaced a 1999 disco td5 , as per norn has the 3 amigos on . It has had the shuttle valve wiring bypass done ,nothing shows up on diagnostics ,the lights go out for a few seconds when i turn the key on but then come back on and stay on , also have the ace suspension light on...
Back
Top