Search results

Is the exchange require an update with nanocom?

Can I differentiate between the two before I take it a part?

Hi everyone, Latelly I have a problem to get the handle of my automatic td5 2004 to D mode. The handle moves smoothly but when it gets to D the red light is not there, there is no D light on the dashboard and I can drive only up to the second or third gear. Until now I played with the handle...

Finally I did it I replaced my legal tires to 245/75/16 which is not legal in Israel. I would like to ear from you how is it in England? Is this size is legal? If it is, can you send me the file that approve it? I am trying to change the decision of the authorities in Israel about that Thanks 😊

Hi everyone In the last two weeks I ear a squeak sound mostly when I tern the wheel, now I am pretty sure I ear it every now and then with no leakage to the position of the wheel. I tried to catch it in a film (sec 23 to the end) and I will be thankful if you can give me an idea where sould I...

Thank u It is going to be 245/75/16r probably.

Hi everyone, I am thinking about replace my tires to abigger one. Now I have 235/70/16r and I thinking about two different sizes: 1- 245/75/16r 2- 235/85/16r I have been told that first option does not require additional changes like appgrade the axles and differentials and the second option...

I couldn't do it without you... thank you all

An intresting update.... I checked the switch and found it's connected to two wires: brown one which was disconnected (just 25 cm of wire with dead end) and yellow one witch I unfortunately accidentally close the screw behind the head on it (the screw witch hold the metal pipe behind the head...

I am afraid I left the oil feed hose uncovered and unprotected. unfortunately, I thought it will be OK to screw the bolt back to the turbo without the hose as the only protection on the oil system. It that's the case... primming the turbo (topping it up) would be sufficiant?

Yes, I did disconnect the oil feed hose

10 sec max. I an not a brave man when it comes to my disco :-)

Took it off the engine.... sorry for my english

One more thing.... I took the a/c compressor apart as well....

Good evening all I just finished today 3 weeks project on my 2004 td5 disco. I replaced my exoust manifold gasket. I had 3 broken studs that I had to extract. 2 of them went out nicely and the last one I had to drill and make a new thread. I tried to extract them with welding as well so I...

Do you recommend a specific company? Sierrafery, thanks for everything..

Thanks, First, checking prefomence of the engine can be done by connecting it to the nanocom? I can ask my meckanic to do that, thanks for the advice. Taking the Catalizator off (part of the exhaust if I understand correctly) is not legal here so it makes all the idea irrelevant. My tires are...

Hieveryone, considering remap my disco 2 td5 2004, after sand driving with some of my friends with disco 3 and Toyota. My disco was so letargic comparing to them so I thought it would be a good idea... Sierrafery, I have Read a privious issues and i understood It would be better to upgrade the...

Hi everyone, considering remap my disco 2 td5 2004, after sand driving with some of my friends with disco 3 and Toyota. My disco was so letargic comparing to them so I thought it would be a good idea... Sierrafery, I understand It would be better to upgrade the intercooler and the exhaused...

Thank u all