Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. W

    Freelander 1 td4

    Hi guys my mate has a freelander 1 td4 he has a problem with the back door and window we have replaced the window regulator and door lock and also new harness and its still not working and no power but tested them on a different freelander and all worked anyone help us figure it out ???
  2. W

    Discovery 2 juddering

    Had a tiny bit of oil in ecu plug but sorted that now found oil today in hose coming off manifold to the intercooler today though
  3. W

    Discovery 2 juddering

    hi guys I posted on here other week regarding my landy juddering and no power n cutting out anyway I spoke to my mate he said disconnect my abs so I did and it drives much better but still judders a little bit I plugged in my hawkeye can anyone share any ideas on these faults and what could be...
  4. W

    Light bar wiring

    If this helps its on a 40amp so its ran off the battery with a relay and it has a built in fuse box on the wiring with a 40amp ?? I get a range of 200m viewing on it . Its like daylight when its on
  5. W

    Light bar wiring

    Hi guys its actual 3,500 lumens the description on ebay says its 3,500lumens I know another lad he had a look and he said its same as his 3,500lumens don't get me wrong there bright as here I get roughly 200m viewing distance in dark so I'm i right guessing there 900w ?
  6. W

    Abs fuse location

    hi guys looking for some advice on my 1999 td5 I posted a earlier thread saying about limpmode or should I say when I go to change into second gear it judders and hill descent comes on and engine light then it cuts out but starts back up once I stopped .... long story short my ecu plug was...
  7. W

    Light bar wiring

    I've just read the description its got a combined wattage of 3,500w with the work lights aswell so basically its kicking out 350w what sort of range you get on these as its curved ?
  8. W

    Light bar wiring

    I thought all this myself but I have a might who sells led light bars and makes them and hes said its genuine when it's on in dark you can see easily 900ms
  9. W

    Light bar wiring

    Wire is that thick you can't bend it mate
  10. W

    Light bar wiring

    My front light bar is 3,500w not 350w you can't buy it in the UK
  11. W

    Light bar wiring

    These lights are 18w not to bright so they should be fine had them on a terios years back and looked mint in dark and wasn't blinding
  12. W

    Light bar wiring

    It has amp built in on this one cheers
  13. W

    Light bar wiring

    It has the wiring kit with it its 3,500w 52 inch :) come with 2 work lights which il wire into reverse switch
  14. W

    Light bar wiring

    hi guys does anyone know where the firewall rubber is on discovery 2 and has anyone got any pictures of there light bar setups ??
  15. W

    Discovery 2 limp mode

    So heres a update on my landy problem so I plugged in my hawkeye which I bought and its chucked up a road speed missing fault im I right thinking its to do with ecu and causing of my landrover juddering ?? So I'm going to wire up a new ecu plug as mine is melted and fingers crossed that's the...
  16. W

    Discovery 2 limp mode

    I went through some deep water other day when it was hot and next min with the heat and water its melted it
  17. W

    Discovery 2 limp mode

    Well he is aswell he's done them before go from there really
  18. W

    Discovery 2 limp mode

    Hi I've not wired anything in yet I'm getting a mechanic to do it who I use i wouldn't know where to start .
  19. W

    Discovery 2 limp mode

    Had it tested tonight and my manifold is only kicking out 108kw should be at 250 ish if not over as it had a remap aswell so not had a service in i dont know how long so that might be one of the issues and also my ecu plug and wires are melted about so my mate told me to get another ecu plug and...
  20. W

    Discovery 2 limp mode

    here a video of it
Back
Top