Search results

Thanks, I removed the tapet cover today, to do a leak test, it seems that the vales is fine except for one exhaust valve, I do not want to remove the cams, as I am not sure how to put the cam Cain back on.

Yes, locking pins were used, Is it possible that the cam can be 180 degrees out, and is it possible that valves could be bent, as we did descover that the belt was 2 teeth out.

Good day,, I hope someone can help, I had my head gasket redone, now my car don't want to start, ECU is speaking to all the modules and working, cam and crank sensor working, Can timing seems to be correct, but as per outo electrical, the pulse to the injectors is at the wrong time, can anyone...

Good day, I hope someone here can help me, I had an assumed blow head gasket on my 2010 Freeland 2, td. I was referred by a trusted friend, to a mechanic. He seems to have messed my car up. After having it at the Auto Electritions, we came to the conclusion that the cam sensor is not sending a...

Thank you, this is one of the first tests I did, found no fault

I replaced the gearbox oil, gearbox is running and changing smooth now, I remove the thermostat and found a leak at the back of the casing. I also flushed the cooling system, I found a blockage in the gearbox oil cooler, I replaced the expansion tank cap, I drove a short distance with no...

I will open the geabox drain an filler plug tomorrow and inspect, I did hit an animal a just before this all started, I had to fit a new radiator, one of the gear oil cooler pipes is slightly bent.

I will try that, thank you

This was also my thought, but gas tests shows no gas and no bubbles when running motor, it only seems when I put the cap back on, it sohow starts to build pressure.

Thanks for reply, I also thought so, but there is no gas or oil coming into the cooling system, I have had it tested at different services stations, there is no loss of power, no steam coming from exhaust. At the rate the water is disappearing, it should run like a steam train lol

Good day, I hope someone will be able to help me, my one radiator pipe popped out and it got hot, but I stopped immediately, I repaired it and filled up with coolent, this was about 40000km ago. I have been loosing coolant gradually getting more and more. I can see no leaks, no loss of power, no...

Thanks very much for the advice

Good day, I hope someone will be able to help me, my one radiator pipe popped out and it got hot, but I stopped immediately, I repaired it and filled up with coolent, this was about 40000km ago. I have been loosing coolant gradually getting more and more. I can see no leaks, no loss of power, no...