Search results

My heater was crap for years until I investigated. As already said there was a gap letting warm air out into engine bay which I solved with a sleeve and foam strip. Secondly the fan, although working, was too slow. Cobbled together a fork shaped adapter to a long spade bit, spray fan with...

Thanks for the welcome

Thank you m'lord

I've got 1" box section across the floor tub and up each side with a rear facing bench seat over the top.(back against the bulkhead) 2mm plate closes off the space and folding seat base can be padlocked down to secure inner space. Also fitted isofix for kids seats.

Thanks. It's 2007, had it since 2010. Can't get to the vehicle right now to check but will try to get to it tomorrow. Checked socket again earlier and got the power back to obd. At pin 16, grounded to door hinge - 14.74v running, 12.60v in other key positions and key removed. Another symptom...

Thanks, The reason I ask is because last time I serviced it, the next service interval couldn't be cleared/reset. The Snap On diagnostics showed no live to the socket. I checked with a multi meter and no power was at pin16. (All fuses fine) Looking into the socket there are connections for...

Many thanks, Took your advice and started it again on the link you provided.

Hi, Just joined landyzone and introducing myself. Never been on any forum before so please excuse any new member mistakes. I've used this site for plenty of tips and guides for my Land Rovers and wanted to say a big thanks. Hopefully I'll be able to give something back now; plenty of faults...

Hi, Just joined landyzone and introducing myself. Never been on any forum before so please excuse any new member mistakes. I've used this site for plenty of tips and guides for my Land Rovers and wanted to say a big thanks. Hopefully I'll be able to give something back now; plenty of faults...