Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. F

    P38A nanacom request? Won't start

    Good morning all, I removed the carpet last night and left the heater fan on, 3 hours later after re-plugging in the battery its started. This is good news as it means I can now drive it to the unit and dry it out properly rather than on my driveway. I would have been lost without all the help...
  2. F

    P38A nanacom request? Won't start

    Thanks all, I'm going to drag it up to my dry unit and start the task of drying everything and cleaning everything, Always amazed at this place and the people (thanks esp Mozz + Datatek) Ill keep everyone updated. Hopefully resolve with out needing to replace the BECM. I needed to fix the heated...
  3. F

    P38A nanacom request? Won't start

    I was missing some trim around the windscreen which I resolved and then sealed up. So its wet wet, or water wet. So, pull out the BECM, dry, pray?
  4. F

    P38A nanacom request? Won't start

    Datatek, There has been water ingress in the past to the footwell, I was pretty sure I had it sorted but it has got wet down there.
  5. F

    P38A nanacom request? Won't start

    I have the owner information and service record, that's it. I have had a read though it and apart from stamps and the original address of the chap who had the car, no other information jumped out I do not have rave, im to old for dancing :P
  6. F

    P38A nanacom request? Won't start

    I'm just going to clarify, The fob ONLY flashes when in the ignition with no buttons pressed, it didn't do this before this issue, the lights flash as they have always done when pressing the buttons, they do not flash when no buttons are pressed, and when its not in the ignition
  7. F

    P38A nanacom request? Won't start

    Hi Mos, I could stand to lose a few pounds :P Hi Flatman . details of vehicle please ??? year etc etc ,, 1998 2.5 Diesel Battery is fully charged, fired up quickly this morning Fob battery is good, was replaced as a I should do that before its an issue about 3 weeks ago I have not had the...
  8. F

    P38A nanacom request? Won't start

    Hello Datatek, thanks for taking time to reply, the lights flash, new battery in it a few weeks back, I have noted that the red light flashes as soon as I put it in to the ignition, it didn't do that before.
  9. F

    P38A nanacom request? Won't start

    Hi all, willing to pay if some one had a Nanacom unit and is willing to turn off the imob? The story, I started out the week with a tailgate that will not open. The central locking (via fob) has always been hit and miss but it has been locking and unlocking fine, there is a new battery in the...
  10. F

    P38A p38 Rang Rover 2.5td Torque Converter Lock-up

    Morning All! Last weekend is the start of many I suspect, I dropped the gearbox oil, new filter and gasket and replaced with good oil and the lucs stuff. The oil that came out was red. There was a bit of carbon but no ferris material. I then replaced the thermostat and flushed the system, I then...
  11. F

    Hello! new to range rover ownership

    the lack of amazing soundtrack would suggest it is, its 100% some idiot put that sticker on as I didnt think they did one in a oil burner format.
  12. F

    Hello! new to range rover ownership

    Im getting 25mpg at the moment, mixed but mostly country lanes with a fair chunk of it being hilly. I was hoping a good service would up it slightly. Lets be honest though I didn't buy it for its MPG Next task is getting some winter tyres on it, choices seem limited with the large wheels though
  13. F

    Hello! new to range rover ownership

    Haven't had time, to busy getting parts to service it and putting fuel in it! :) ... I thought the 335i was heavy on the old fuel...
  14. F

    Hello! new to range rover ownership

    Hello! I'm new to range rover ownership, I not long purchased a p38a for a bit of a winter run around/project. Had many many many cars... First Range Rover though. I wanted something I could use for towing, bad weather and snow. As the username suggests, many panda's have been had and still...
  15. F

    P38A p38 Rang Rover 2.5td Torque Converter Lock-up

    Life without my panda is sad
  16. F

    P38A p38 Rang Rover 2.5td Torque Converter Lock-up

    I'm going to leave it in park, as I do not want to run over my self, it would ruin my morning!
  17. F

    P38A p38 Rang Rover 2.5td Torque Converter Lock-up

    Fluid is red and correct, no burnt smell, going to do the change anyway as there are other things I need to attend to so may as well get it all out of the way in one go. I should get away with 5ltr then. Anything I should be doing different as its got a dipstick on the box
  18. F

    P38A p38 Rang Rover 2.5td Torque Converter Lock-up

    Thanks kindly for your reply Datatek, I was going to hunt though what oils, filters ect to use. ill avoid asking what oil as I know that's something that causes great argument and people to be shot :)
  19. F

    P38A p38 Rang Rover 2.5td Torque Converter Lock-up

    Mark, thanks, I suppose its possible engine temp has an effect on how and when this locks up as well as gear changes. Advice taken and noted as regards the Thermostat, Should have a busy weekend! thanks.
  20. F

    P38A p38 Rang Rover 2.5td Torque Converter Lock-up

    By the time I get to the bottom of the hill the temperature drops back down to cold, hence i suspect the stat is stuck in the open position.
Back
Top