Search results

Yes you are right. I tried it again. It sounds like it's willing to start up. I think I geht that pump to a service for a pump test.

I don't know the exact pressure. But it's enough to spray diesel up to the hood. I didn't touch any adjustment screws at the pump. Is it possible to get it running by turning the pump around or should it also fire up with a "not perfect" timing?

But the pump is pumping really well now.

Hi there. I got some news, I disassembled the whole pump. The main pump plungers where stuck. Now I got a good amount of diesel at the injectors. But the engine still won't start. Even while towing there is only white smoke, but it won't fire up. It runs when I spray diesel directly into the air...

I used different solenoids and they both seem to work. I think the lift pump is working correctly, at the pump bleed screw a lot of fuel is spilling out. I cranked till the Batterie was empty but at the injector only a few drops came out. I'll try it again tomorrow with a full loaded Batterie .

Hello, today I installed a used injection pump Same effect, only a few drops of fuel is coming out at the injector lines. :(

I think air is not the problem, we bleed the whole system many times. There is no air left and there is also no fuel leak. It has to be a failure in the IP. The pump doesn't build any pressure and not even a single drop of fuel is coming out. Do you guys have any idea where I can get a used or...

OK that makes sense to me. No I bought a not running car.

I replaced the fuel filter a few minutes ago. Now I try to bleed the system again. But it seems that the hand pump only works at half the way. Yes the pump has a solenoid, I checked that already. It's working.

I wanted to bleed the pump by sucking the air out. why won't this help?

I plugged a vacuum pump at one of the injector hard lines. A lot of air and a little bit of fuel is coming out. What are the common air leaks I should check?

Thanks for your reply, Already tried that, no fuel gets to the injectors.

Hi, I got a 19j Turbo engine from 1989.

Good morning, I bought my first Land Rover yesterday and now I'm trying to start it. I bled the fuel system based on the workshop manuel. I think there is no more air left in the system . But I'm still not able to get fuel to the injectors. The injector lines are loose and no fuel comes out...