Search results

I feel an Oooops coming

I don’t think you need to remove the mirror it just pushes on provided the clips which are in the door are intact I think

Apologies all for the tardy final update, cutting a long story short at the back of the engine there is a short rubber pipe that leads up to the fuel rail sensor and the pipe was split … so fairly straightforward but not easy to fix, I got a new length of fuel hose cut it to approximately length...

A quick catch up Saturday fitted new MAF and MAP sensors along with new to me air box, with air filter and then the pollen filter, today I raised the headlights using the vertical adjustment, I’ve successfully got the “dipped beam” about right but the main beam don’t throw light very much...

I’ll second the suggestion @pipnmillie I just bought a set from camskills https://www.camskill.co.uk/m54b0s480p148136/Yokohama_Tyres_Car_Yokohama_Geolandar_AT_G015_235_65_R17_108H_XL_RPB_TL_Fuel_Eff_%3A_E_Wet_Grip%3A_C_NoiseClass%3A_B_Noise%3A_70dB

@Murphy1010 And the codes were ? I have a similar problem this evening so really appreciate to know what your were and what the fix was

I’ve just ordered a full set of Geolander G015s from Camskills, still got a bit of wear left on the Bridgestone Weather Control A005 EVOs on since only July 23 .. about 22000 miles with perhaps another 2000 to go , I’m only off road in fields / paddocks my daughter and horses so nothing too...

Managed to pull the door card apart so could get inside it , took the window glass out then after a few hours managed to pull on the long cable (had been repeatedly doing that) and hey presto the door finally opened , so now to fix the door motor or more likely the outside door pull cable had...

Managed to pull the door card apart so could get inside it , took the window glass out then after a few hours managed to pull on the long cable (had been repeatedly doing that) and hey presto the door finally opened , so now to fix the door motor or more likely the outside door pull cable had...

Managed to pull the door card apart so could get inside it , took the window glass out then after a few hours managed to pull on the long cable (had been repeatedly doing that) and hey presto the door finally opened , so now to fix the door motor or more likely the outside door pull cable had...

Managed to pull the door card apart so could get inside it , took the window glass out then after a few hours managed to pull on the long cable (had been repeatedly doing that) and hey presto the door finally opened , so now to fix the door motor or more likely the outside door pull cable had...

Hi @garyjames how did you get out of the door locked pickel ? I’m in a similar boat

@ChieftainMK2 how did you get the door unlocked / open ? I’m in the same boat with the drivers door shut..

@Nodge68 i have a drivers door which doesn’t open from inside or outside the motor goes and the latch and lock “buttons” move but nothing happens with the actual lock .. I think you are saying removing the door card if I can with the door shut will allow me to get at the cables inside yes ...

Hi @Arnie280856 … I’ve got the same issue but drivers door how did you get the door open ?

Hi all in this thread ...simply to say having discovered a rattle whilst out and about for the day yesterday and although stopping to have a look around i couldn't see anything a-miss ... so today being able put my FR2 up on ramps i discovered that the rear exhaust heat shield had "broken free"...

I got new door lock motors off the bay from "proper garage type sellers" admitedly chinese ones for around £40 last year, they are probably exactly the same as the proper LR parts just without the mark up, I put 3 in with no issues although as Nodge says it takes a while i think the quickest i...

Hi Mcclegend, did you ever find out how to fit the camera and thus the wiring

Hi Phil, sadly i don't have the knowledge for a solution with you not being able open the door, I had a similar problem except in reverse the door wouldn't lock and the handles did nothing much, i found that the door lock motor / acutator had gone kaput, so i found one (they only come as a...

Welcome grifter, i don't have any experience of those models so i can't add any thing of use