Search results

yes the face lift f1 td4 3dr

does anyone know if the front seats from a freelander 2 3dr will fit a freelander 1 td4 3dr ?

thanks i will try that should be easy as i have new mounts to work with

how difficult is it to press out the old bushes without a press, i was thinking of making a square frame with thick wood and brackets and a bottle jack ?

only need 2 things either tow your garage or carry a AA/RAC card !!

if the piston is ok you will need to take the dust cover off and seal as they tend to swell, check behind the seal for " furring " and clean, replace with new seal and dust cover put a little bit of brake fluid on the piston and push it back in by hand should go in but if not then a "g" clamp in...

need to replace my rear diff mounts on my TD4 which are best the standard ones or the polyurethane ones not much difference in the price ??

just an update my freelander TD4 just passed it's MOT new emissions test WITHOUT AN EGR VALVE yah !!!! as predicted the emissions were lower than specs for a new car !!

just read new rules new emissions seem only to apply with cars with a DPF fitted which is all diesels from 2009 and some from earlier the freelander does not have one !!

it's due it's MOT next week i will update on the outcome !! fingers crossed

on the freelander under arch shelf there are 3 items, low pressure pump round item with in and out connectors and electrical plug a round silver cylinder this is the fuel filter in at one end out at the other and a round black fuel filter ( i believe to trap any moisture ) just needs cleaning by...

just put on new rear exhaust box £40 off ebay bargain with clamp and mounts

i have told my insurance and they tripled my cover because they can !!! bar stewards !! as for the EGR valve in theory it's does not work as it is suppose to redirect some of the exhaust gases back through the engine to be re-burnt which means less oxygen and therefore doesn't burn as well, mine...

also replaced rear diff mounts TWICE and vj bearings TWICE !!

i would like to introduce myself to the forum i have a freelander td4 3dr se for my sins done lots to it to make it better, complete new brakes, threw away EGR valve, fitted ronbox chip, centrifugal oil separator, new rear door lock/handle, bleed clutch csc and full set of new tyres and re dyed...