Search results

Does the Check Engine light on? When my #4 injector failed, starting the engine was loooong... Finally, I removed the edc completely and went back to mechanic pump.

Hi, I'm using a "Jasic 200" Mig welder. 0.8mm wire with a regular CO gas. Do not forget the welding mask, gloves and welding jacket (many people tend to pass on the gloves and jacket, I can say from a personal experience, having flames all over you is not a nice thing...) I use Miller jacket and...

I'm using cTek battery charger, but, charging the battery is not enough, especially for our old Landies. You should drive it for few minutes at least once/twice a week, otherwise, oil seals will be dried and you will start seeing leaks (yes, more than it is already leaks :) ) Sludge will "sit"...

שלום it is :)

I'm running BF 245/75/16 for the last 2 years. very happy with the size. (had 235/70/16 for few days when I bought my Disco, too small for me )

I cancelled the edc. (Troubles with injector #4, keep it simple ;) )

I guess you are driving a 5 gear's manual transmission. Mine is automatic, 4 (the common combination around here is 300tdi auto.) In order to brake better, you can replace the front calipers to defender ones, if I'm not wrong, they are bigger.

300bhp/ton, Won't you need to change gear's ratio for these tires?

So I guess 245/75/16 with camel cut would be the best.

Amazing project. I wish it was legal here, where I live.

I run extended shocks as well (thought it was clear ) Basically, I agree with your philosophy, stay low with bigger tires. Very nice flexing in the pictures. (Reminds me my old Cherokee xj (the disco is also fine, of course :) ).

I agree about the center of gravity. The travel is the same as before since the initial height is higher. BTW, nice disco you have there.

300bhp/ton, If you replaced springs in order to lift the car, you should lower the bump stops. That way, you gain height but won't harm the body.

BTW, instead of spacers you can use a negative offset rims.

Yes, wheel spacers will defently improve the look. BTW, the rear arches are wider than the original ("camel cut")...

Thanks. Why won't spacers work? I guess you mean wheel spacers, I don't really like them as I don't want to overload the axles and they are not really legal here. If you meant spacers as lift, it will work as well although it is better to replace springs/shocks.

If your power train is completely stock, I wouldn't go bigger than 245/75/16. you may go for 31" but the rims are 15" in that case. That is my Disco 1 with 245/75/16 (BF):

I'm from Israel

Installed a Boost Pin after removing the EDC. How can people drive the Auto 300Tdi without it???

Thank you