Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Dan simpson

    Disco 2 TD5 No indicators or hazards

    So managed to find the fault. It was the Purple/brown wire underneath the fuse box in engine bay where it goes into the loom. It was severely corroded but just to say held together which is why we were only getting 9v. Cut the corrosion out and soldered a new bit of wire back in its place and...
  2. Dan simpson

    Disco 2 TD5 No indicators or hazards

    So the pins marked in red are approximately 9.6v ignition in or off. I hope this helps
  3. Dan simpson

    Disco 2 TD5 No indicators or hazards

    Measured on battery shade over 12v. Measured at fuse F14 is the same. At the both relays its 9v at one of the larger pins(both relays)
  4. Dan simpson

    Disco 2 TD5 No indicators or hazards

    Swapped the stalks and still no joy. I do have RAVE. I did check fuse F14. I checked that first as I hoped it was that.
  5. Dan simpson

    Disco 2 TD5 No indicators or hazards

    Hi, swapped the BCU's over and still nothing! I havent encountered any other issues just the indicators and hazards.
  6. Dan simpson

    Disco 2 TD5 No indicators or hazards

    Hi everyone, I have a problem with having no indicators or hazards on a 2004 disco TD5. The light comes on the dashboard for one flash then nothing but no lights actually come on. I've tried a few things but not got any further forward. i swapped the internal fuse box with IDM off a 2000 v8...
  7. Dan simpson

    Discovery 2 LSD or lockers

    I seen somewhere about cutting a wire on the slabs ecu when installing difflock. Thanks bankz5152. Who isn't a hooligan when the snow arrives ? Haha So you would definitely recommend the Ashcroft ATB? It's the one I have been looking at. Thanks everyone for the advice and information
  8. Dan simpson

    Discovery 2 LSD or lockers

    So basically to make it work without any problems I best put LSD in front as well when I replace the rear? If I start it up with difflock engaged the abs light and traction control light come on. Is that the same as just having the wire cut ?
  9. Dan simpson

    Discovery 2 LSD or lockers

    Yes I do have centre diff lock Would it still be a good idea changing the shafts with an lsd?
  10. Dan simpson

    Discovery 2 LSD or lockers

    So at the weekend while attending a pay and play day my rear diff decided to blow up and send bits through my axle casing. I think too much right foot was the issue I'm stuck between wether to get a locker or limited slip diff. What does everyone recommend?
  11. Dan simpson

    Hello all from teesside

    Hi Turboman. It's an auto. It's ES spec
  12. Dan simpson

    Hello all from teesside

    Hi everyone, I have recently just purchased a 2000 discovery v8. Owned a 300tdi discovery commercial before and I'm loving the land rover life (i just be mad) I hope to learn a lot from you guys.
Back
Top