Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. P

    Disco 3 (LR3) Air suspension issue - C1A13

    Thanks for the file - I assume receiver is a typo for reservoir? Yes as I said above the reservoir appears to be new 2019 and in reasonable nick, the hose to it has no obvious leak with soapy water.
  2. P

    Disco 3 (LR3) Air suspension issue - C1A13

    Whats the receiver please?
  3. P

    Disco 3 (LR3) Air suspension issue - C1A13

    Thanks I'll try some contact cleaner on the offending plugs. Could a bad pump actually be the issue? The pump appears to operate aside from noise, switching off when gallery pressure gets to ~255psi. The gallery pressure then drops to around 40psi and slowly reduces, presumably a leak...
  4. P

    Disco 3 (LR3) Air suspension issue - C1A13

    Thanks for that - With the testing i have done then, it appears the only cause could be a occasionally malfunctioning exhaust valve/coil to it? Can't be muffler, can't be things installed incorrectly as it works some of the time, can't be blocked gallery as it works until the fault flag...
  5. P

    Disco 3 (LR3) Air suspension issue - C1A13

    I have the above issue coming up - had a new compressor around a year ago (when it was my dads car) and it has been noisy since. In the last few thousand miles its been throwing up a 'suspension fault' message either at start up or during the journey. It will say stay below 30 if i drop below...
  6. P

    P38 'Gearbox Fault' problem - help solving?

    Thanks for the suggestions - i think i've just cracked it. The plug connector behind the rocker covers wasn't clipped together fully - i'd found it looking tired last week so contact cleaned and pushed it back together with a cable tie for good measure (obviously just enough for one day). What...
  7. P

    P38 'Gearbox Fault' problem - help solving?

    £60 at my well regarded local indy specialist for a code read and not until march 2nd! They're doing ok. Does anyone know if the nanocom evolution can be used on as many vehicles as you like? I have 2 p38, one GEMS v8 and one late 2.5 DSE. I'd also like to know if could use it on a later v8 if...
  8. P

    P38 'Gearbox Fault' problem - help solving?

    Yep checked from cold! I actually think it had a bit much in, maybe 250ml which i have removed today. The transfer box was apparently changed recentlyish, which connection is that? The big black plug on the back? I have disconnected and reconnected all of them so *think* they're all good. I...
  9. P

    P38 'Gearbox Fault' problem - help solving?

    That was the next plan - just hoped i had missed something obvious. Do the ecu's forget or get blown somehow? I'm just curious of why the ECU change let it work for a day before showing up the fault again.
  10. P

    P38 'Gearbox Fault' problem - help solving?

    Engine running, in neutral, it shows in between the lines on the dipstick. I topped it to this level so it was a touch low before. Its red, not burnt!
  11. P

    P38 'Gearbox Fault' problem - help solving?

    I bought a P38 4.6 GEMS which has gearbox fault showing. I have done reading on it but can't quite work mine out - hopefully someone will be able to suggest something else i can try to fix it for good. Symptoms : After starting the engine the gearbox fault flashes up after around 5 seconds. It...
Back
Top