Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. James Blakely

    Beeping sound just started

    Yes will be doing that as I'm not going to be towing anything anyway.
  2. James Blakely

    Beeping sound just started

    Sierrafery The wires went to the wiring for the tow bar. Yes Marjon it did have one but I took it off about three months ago when I fitted my Wildbear bumper.
  3. James Blakely

    Beeping sound just started

    Not got a clue just chopped the wires and shrunk the ends. Was not at the garage will have a look latter when I have the time.
  4. James Blakely

    Beeping sound just started

    Yip guys Someone had fitted a sounder, it was scotch locked on. Now disconnected one of the wires in a scotch lock had came loose. All's quiet now. Thanks for the help.
  5. James Blakely

    Beeping sound just started

    Hi Sierafery Can't figure out my phone but it sounds like a forklift reversing, its coming from the rear right hand side.
  6. James Blakely

    Beeping sound just started

    Thanks Sierrafery I'll go and record it just now.
  7. James Blakely

    Beeping sound just started

    Hi all My Discovery 2 TD5 has started to beep when I put on the left indicator, it sounds like the sound is from the right side rear! Any help would be a great help thanks in advance for any help.
  8. James Blakely

    Disco 2 SLS metal bracket

    thanks guys just have to fab one up
  9. James Blakely

    Disco 2 SLS metal bracket

    It's this bit here guys it's rotten and burst on the bottom
  10. James Blakely

    Disco 2 SLS metal bracket

    Guys does anyone know the part number for the SLS compressor box metal bracket to chassis.
  11. James Blakely

    Ace removal can you still have aie

    Thanks. I have noticed that you can get the removal kit with thick rear bars and thin rear bars, does any one know what kit has the thick rear bar? thanks for any advise.
  12. James Blakely

    Ace removal can you still have aie

    Thanks pal I thought I would have went to coils.
  13. James Blakely

    Ace removal can you still have aie

    Hi guys and gals If I remove the ace can I keep the sls / air. Cheers for any replys James.
  14. James Blakely

    Gulf and police?

    So it is in my head. cool need to try more of this. The motor befo felt better going up hill. Stew. By the way the leveling thing worked a treat M8 thank you.
  15. James Blakely

    Gulf and police?

    Hi sierrafery I have turned it on and my stutter at 1500 to 2000 is not there any more , it may just be in my head though. But It pulls better going up hill. Stew.
  16. James Blakely

    Gulf and police?

    Hi guys I was just going through the nanoco and found a thing in there for Gulf and under it Police does anyone know what these are. cheers Stew.
  17. James Blakely

    Help with level sensors setting

    Cheers Griff That's them ordered M8. Got the sizes and ordered Stainless.
  18. James Blakely

    Help with level sensors setting

    sierrafery Got the nanocom and your advice was perfect. worked a treat, all fine now. Just another Question does any body know the part numbers for the height sensor bolts? Thanks again for all the great help.
  19. James Blakely

    Help with level sensors setting

    Thanks sierrafery will do.
  20. James Blakely

    Help with level sensors setting

    Well guys ordered a nano evo yesterday. what measurements do you put in for the height, do you measure from the bump stops to the top of the axle? It will be with me between 5 and 10 days they say.
Back
Top