Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. R

    Manifold Pressure high logged 3030

    thanks, yes I am waiting on a fusebox then that will be done. I will trace the wiring back from the sensor on the top of the manifold, I am not sure where it gets bundled within the loom but will go as far as I can. Thanks again.
  2. R

    Manifold Pressure high logged 3030

    Bit of an update and it is worth noting I had another post about indicators/hazards not working and a strange emblem in bottom left of mileometer LCD......no idea if this is all related. I have now got that emblem and no central locking or remote locking! The alarm/imobiliser by the way I had...
  3. R

    Manifold Pressure high logged 3030

    Thanks, I will get some live data readings and come back over the coming days and post back. My reference to the boost gauge reading was for two reasons. First to show it has boost and if there is a leak it is only small but secondly the boost has dropped to where you say the limited amount in...
  4. R

    Manifold Pressure high logged 3030

    Thanks to you both, the 18-19 psi I had set previously when working on the truck. Strangely the lower 15 psi boost has only manifested SINCE changing the sensor on the manifold. I may put back the old one I took out to see what happens. I only removed it because I had the over pressure code all...
  5. R

    Manifold Pressure high logged 3030

    I understand that explanation thanks........but driving it does hold steady boost
  6. R

    Manifold Pressure high logged 3030

    it has boost...15psi. Dont think it has a leak.
  7. R

    Manifold Pressure high logged 3030

    Thanks, truck is baing a pain at the moment! had it 16 years so know it well. I replaced the sensor in the top of the inlet manifold held in with two bolts. I did look at Haykeye live data before I posted......it confused me (does not take much on modern c ecu type cars !!) as it seemed to be...
  8. R

    Manifold Pressure high logged 3030

    sorry..forgot. Disco 2 TD5, pre facelift.
  9. R

    Manifold Pressure high logged 3030

    I have a constant fault on the Hawkeye...clear it, start it and even just run on drive the code reappears. 3030 manifold pressure. Any ideas, I have put a new sensor in and just the same. If it has any bearing....EGR removed long ago
  10. R

    Flashing sign in milometer LCD and no indicators??

    Thank, on the hunt for a fuse box now!
  11. R

    Flashing sign in milometer LCD and no indicators??

    So I have looked at both fuse box and the BCU...wiggled all plugs and see no sign of water/corrosion though she has been a bit damp in past few weeks in rubbish weather and lack of use! The fault remains intermittent, so fuse box replacement is fist call. The plugs look horrid to get to on the...
  12. R

    Flashing sign in milometer LCD and no indicators??

    Thanks, I may first try cleaning up all connections.....I did in the past have water leaks down both sides of the bulkhead. This problem has manifested after it was left standing for 4 weeks after the mot and weather is so damp and minging the truck is very condensed inside. Then as you say if...
  13. R

    Flashing sign in milometer LCD and no indicators??

    Thanks sierrafery. It is indeed that sign and very intermittent. Went out today not working, came back fine. I will look at your link to see where to start.
  14. R

    Flashing sign in milometer LCD and no indicators??

    I have an intermittent on the D2. I only notice loss of indicators and hazards at the same time. When they are not working a small flashing rectangle type sign comes up in the bottom left corner of the LCD displaying the trip and total miles. Handbook says nothing ! Nobody spoken to yet seen...
  15. R

    Disco 2 Gear select bush etc

    looking zt gearbox shape I really think it would just end up in the bottom out the way, I feel sure it must be common anjd there are many in the bottom of gearboxes...the clip can only drop in if that plastic bushing fails!
  16. R

    Disco 2 Gear select bush etc

    I have answered my own question, found the part and also that it should have a circlip which has evidently dropped into the gearbox......hopefully laying in the bottom causing no issue! New bush and clip ordered.
  17. R

    Disco 2 Gear select bush etc

    I had a shocking drive home with a trailer on Monday when the gearstick (manual) decided to baulk on nearly every gear.....stripped and it is the plastic bush on the link that the lever ball locates in broken and dropped in a bit causing obstructions. Firstly what is it called so I can locate a...
  18. R

    Ongoing roof leak work. Remote receiver? wiring. (D2)

    thanks yet again, its worth a punt trying another one before I start chasing cables and things. They all look ok.
  19. R

    Ongoing roof leak work. Remote receiver? wiring. (D2)

    thanks, ACE, nowt to do with the plipper then! haha Hawkeye tells me no plipper seen, both keys show red light on use and both work when it has worked. I assume if no plipper seen it can only be the RF receiver or wiring back to the relevant ECU, the ecu I also assume works because it "talks" to...
  20. R

    Ongoing roof leak work. Remote receiver? wiring. (D2)

    The item on the inside or roof near mirror is one picture. The other two are the unused loom which was wrapped in foam and folded over.
Back
Top