Search results

I have fit 285/75R16 on the car and lift it about 2" ou a bit more. And the ACE ram is stretch and I would like to extende the anti roll bar drop links. Thanks

Hi, I want to change my rear anti roll bar of my Disco 2 TD5 and add more 2 inchs. I was wonder if there is another anti roll bar with more 2" than the stock disco rear anti roll bar. Where can I find the lenght of the rear anti roll bar and the others anti roll bar from other land rover models...

Thank you. Ill try

The hydraulic lash adjuster doing the noise Last edited:

Thank you, ill take a look at that possibility. Any sugstion on how to find that out?

I think is injector cutout test.

I have a a NANOCOM. I thought i could to that in the ECU. Stop one injector from working, cut off test, i dont know if that is how is refer. But i cant find that in the NANOCOM

Hi, im trying to test my injectors. I would like to stop each one at the time to see witch one is making he knock any suggestions? thanks

Only with a NANOCOM?!

Hi, I removed the middle muffer, the injectors are ok, at least I think base on a NANOCOM. I have no EGR. I was thinking in the best commitment power reliability 170HP?! I will clear the air intake intirior.

Hi, I´m thinking in acquire a bigger IC for my Disco 99. What are the recomendations? I have seen several brands but 400 is a bit for a IC I think, is there any cheaper alternative? After this I have a NNN120 to mod and put in the Disco Is recomended any more mod for a ~170 HP :) Thanks

Hi, I have acquire a ecu NNN120 for my disco 99. I have a frende that give me a map file (.map). How can I put it in the new ECU? And how can I get the ecu map to change and put it in. Best Regards

Hi, im starting to use the arduino to read the codes from ECU. Can you give a hand here? Thanks

hi, Im trying to do the same thing by reading information from de ECU. Can you share any information with me on how to make the handshake. I´m starting now and i´m waiting for the arduino to arrive to start :) Best regards

I´ve done that already. It gives no values. Could it be a earth problem?

It gives no values.

Hi, I have a problem with my Discovery 2 TD5. The air mass sensor is not giving any values. After evaluating the problem I noticed that there are no values in the MAF. The pin 1 and 2 o 3 (12v) have no connection problem, the cabling is good. I made the following test to evaluate the cabling. I...