Search results

Hi all, I am needing to replace the Radius arm and panhard rod bushes on my 1996 D1. As I need to send it to the engineers to have new bushes pressed in , my question is can I remove both radius arms and panhard rod at the same time without causing any issues or should I be doing them one at a...

Hi all, I am fitting part 624091r a coolant adaptor to my new head - should it have an oring or something , or does it just screw in ? Thanks very much ! Steve

Hi all, I am struggling to find a bracket and clip for the heater return hose where it passes over the water pump and pulley, has anyone made an alternative that wouldn't mind sharing some pics ? Thanks Steve

HI all, After some advice please. The previous owner of my Disco has blocked off the Heater and removed the pipework. I need to replace the bottom radiator hose but am unsure as to blocking off the pipe that leads to where the heater pipe on top of the head should be. Any advice please ? Thanks

Hi all, the lettering on my Nudge bar is looking poor and I would like to redo it. Anyone done this and have any advice ? Thanks Steve

Evening all, I have a rounded off bottom bolt on my thermostat housing. Is it possible to remove the whole housing from the head so that I can sort this out, without causing a major headache ? Steve

Hi all, Can anyone tell me what is the easiest way to get to the Breather Pipe on the LT230 transfer case? I cannot locate it from under the truck (any pictures of its location would be great!) Thanks Steve

Hi all, when I got my Disco the EGR system had been removed, I am now hearing a hissing sound coming from this module (right wing near air filter). It has 3 pipes and 2 are broken off any advice on this as I believe one goes to the brake servo pump? Thanks Steve

Evening all, Water leaking everywhere so removed headlining (recently repaired) from my Discovery 1 and found that the front passenger side drain pipe was disconnected. The problem is that the pipe is too short to reach the plug on the drain and the pipe will not move. It seems to be stuck in...

Hi all, Need to remove sump and reseal as it is leaking at the rear bolts. What do I need to remove to be able to get it out? Anything special to be aware of if removing ARB etc?