Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Dutchy7

    Wiring confusion.

    Landy owners! Have a 1990 defender 90. 200tdi. Had to take out the dash and didn’t think I needed to take pictures of the wiring setup because I thought I would be able to remember where the wiring went. Changed out the ignition switch and took me awhile to put everything back together and now I...
  2. Dutchy7

    Electrics this time!!

    I appreciate the advice. I’ll get started on that to see if that may be the issue. Replaced the hazards switch and things are running smoother but still no horn. I’ll get started with the cleaning and move from there. Thanks again!!!
  3. Dutchy7

    Electrics this time!!

    Land Rover lovers, having a similar issue. I really hope someone can point me in the right direction. Issue!!! My left and sometimes right don’t indicate. My right goes on more often then the left. They are LED upgrades on my 1990 Defender 90. I put three new switches on and still same issue. I...
  4. Dutchy7

    2004 freelander se not starting.

    That is good to know. Thank you. Now with the new starter and new battery nothing turns over. So you all suggested to recheck everything and ensure it is tightened and placed properly then move to the fuses and relays? The help is very much appreciated.
  5. Dutchy7

    2004 freelander se not starting.

    The starter was check and it was bad. But the battery was changed first when it stopped working. The old starter was in there. Now I’m thinking relays blew?
  6. Dutchy7

    2004 freelander se not starting.

    Just going off information I was given. I yet have been able to get into it. Which I will but I was also seeing quite a few saying that it maybe the neutral safety switch. Could this be that and how would I check to see if it’s a bad switch?
  7. Dutchy7

    2004 freelander se not starting.

    V6 yes. It doesn’t crank with the new battery or starter. Before with the old battery it did. Then charged the battery because they thought it was dead then it started again. Then after that it didn’t that’s when they bought the new battery. But as of right now with all the new stuff it’s not...
  8. Dutchy7

    2004 freelander se not starting.

    Have not tried that and it’s a v6 that was in Florida. Dropped off in Texas from a guy.
  9. Dutchy7

    2004 freelander se not starting.

    2004 freelander not starting. New starter, new fuel pump, fuses are good and battery is new. I’m leaning towards the expensive neutral safety switch but want to check with you all before I go making that expensive purchase. I’ve tried starting it in all gears. Nothing. It would start...
  10. Dutchy7

    2004 Freelander Se not starting.

    2004 Land Rover freelander se not starting. Turn the key and not even turning over. The battery was replaced. Fuses are good and fuel pump was replaced. It doesn’t start in neutral or any other gear. I’ll turn it and nothing happens. Starter was replaced as well. I’m seeing it may be the safety...
  11. Dutchy7

    Fuel injection pump and timing belt install.

    Landy lovers! I have a 1990 Defender 90 200TDI. I have to replace the FIP because mine is currently busted where I cannot repair. I am also going to change the timing belt. It seems pretty simple to instal the FIP and belt but what is unclear are the steps after the FIP is installed if I need...
  12. Dutchy7

    35” tires rubbing

    I have a D90 with a lift and 35 inch tires. It’s rubbing on the control arms. Has anyone had this issue before? Using wheel spacers do the trick to get it to stop? Thanks for your help.
  13. Dutchy7

    200 TDI exhaust

    i have a 1990 Defender 90 200 TDI. I want to get the silencers replaced and I know where to get the straight through pipe but what do I do for the rear silencer?? Do I cut off the tail pipe and weld? Or is there a piece I can purchase?
  14. Dutchy7

    Intermediate gear on lt230

    Thanks James. Makes sense. I’ll keep you guys posted once both are put back on. Keeping my fingers crossed it does the job. Thanks to you both for your patience.
  15. Dutchy7

    Intermediate gear on lt230

    Real quick update. Finally got the nut off of the shaft. What happen was that when I thought I was tightening it I wasn’t. The shaft was twisting with the nut. I had to hammer and chisel it off to turn it without turning the shaft. Any advice on how to put the next one on without the shaft...
  16. Dutchy7

    Intermediate gear on lt230

    Anywhere you would suggest getting one from?
  17. Dutchy7

    Intermediate gear on lt230

    I have actually been driving on it for some time. So I think it might be time to get a re furnished one. Thank you for the help.
  18. Dutchy7

    Intermediate gear on lt230

    So then I’m looking at an overhaul of the transfer case all together? Buying a new box like James said?
  19. Dutchy7

    Intermediate gear on lt230

    Thank you for all the help. I’m gonna take the play completely out of the shaft to see if that fixes it. Thanks again.
  20. Dutchy7

    Intermediate gear on lt230

    So the shaft not gears are moving front to back so then I would have to tighten it some more ? Sorry my brain isn’t gonna come off this unlesss I figure it out because I do not want to spend the money they are going to charge me here in Texas.
Back
Top