Search results

Hi Henry, Don't make the mistake I did, I bought a Land Rover 90 1984 5 years ago, and didn't know what I was getting into. I had bought the worst vehicle ever, it had a completely rotten chassis, and bulkhead. Tought me a lesson or two. Had to strip the thing down to the bare chassis...

Hi English, I had a similar event occur to me whilst driving my Disco TD5 (i know you have said you have a 300tdi) back from Manchester to Surrey a couple of years back. When it went over 65ish it would sound like it was not running on all cylinders. Made for an interesting 300+ mile...

Sounds like an air lock to me.

Hi, I purchased a replacement off ebay, turned out I got the wrong mhz. Both boards are red, so colour of the boards is completely irrellivent. Rich

Convert your disco to run on 100% pure veg oil. I have done this to mine, and it is great!

Hi Guys, I got myself a Land Rover Disco yesterday. Everything on it is perfect (well to my standard :D ), however the speedometer is not working. I have removed the VSS wire of the VSS, however the wire seems fine. I got an ammeter and checked the green wire, and it is being earthed...

Hi Grunt, Thats what my volt meter tells me. It is an isuzu 2.8td engine though. Cheers Rich

You should google "joe cell" thats quite interesting. Hydrogen power from water. Apparently this guy Joe has been able to run a car of this simple device, although I am sceptical. Rich

Hey Adam, I am in Guildford. I am going to be selling my 90 in about a week and a half (got myself a disco). Mine is a bit of a dog though. It has an Isuzu 2.8 Turbo Diesel Intercooled Engine. Roof Rack Bull Bars CB, and the usual stuff. I also have converted it to run on pure vegetable...

Yeah I run my Land Rover 90 on veg oil, and frequently find that loss of performance is down to 2 things: 1. Fuel filter 2. Air in the fuel lines Hope this helps. Regards Rich

Cheers for the advice. What I dont understand though is that on my volt meter it shows a good 15 -17 volts charge when running the engine. I do have two batteries, but I will keep an eye on it. I will probably have a tinker this weekend and see how i get on. Will keep you informed when...

Hey all, LANDROVERTHING.COM :: Your only resource for Landrover Websites is slowly growing I have had 45 submisions to the directory today. Remember the website is for anything related to land rovers, so if you know a site that may be of interest to the directory, post it here so I can add...

Hi Guys, Got a problem with my 90. Yesterday as I pulled away from a petrol station my Battery Light lit up. So I initially thought great alternator belt needs fixing. However it seems to be fine. The light gets brighter the higher i rev. Could this be a sign that I need a new...

Hi Guys, I have been working on a land rover link directory, still in development. However if you know any links, or companies or websites that should be on there, please take a visit and submit them. The website is LANDROVERTHING.COM :: Your only resource for Landrover Websites :D...

Yeah, yeah I realised that now. I meant melting the metal to a state that blows holes in what your welding.

You are talking about an outrigger. This just gets cut off, and the ones from paddock are reduced in size to go into that hole (the hole created from angle grinding the old one off). The welding doesn't have to be that great, but just go round the whole thing, just try not to melt the...

Hey Discomania, All the bits you have mentioned are replaceable parts. The front outrigger gan be easily bought and welded on. As for the other a little bit fidely, but none the less easy to get hold of and weld. To buy the parts, your probably looking at £70 from paddocks...

Hi can you put a global request to meta refresh the pages for each visit to the site. It is sometimes annoying that without remembering to clear my cache each visit to the site, some posts appear unanswered when they have actually been answered. Cheers Rich

I think you are asking a bit much mate. I recently had to reweld the whole of my chassis on my 90, good thing my old man is pretty good with a welder. What needs welding? Might know someone.

After all this bloody freezing weather we have been having, I too have been thinking about upgrading the heating. I know there is a unit that you can get. I am looking for something that wont cost an arm and a leg, anyone point me in the right direction? Regard Rich