Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Edmund Butler

    hEEEElp!! Need the female plug at the end of the loom...

    Well, at that price, I'll take a case!... what do you want for one?
  2. Edmund Butler

    hEEEElp!! Need the female plug at the end of the loom...

    How would water in the towbar socket affect the dashboard switch?
  3. Edmund Butler

    Hi Paul, I'm looking for the female end of the hazard flasher loom for a 1989 110 Hicap. Per my...

    Hi Paul, I'm looking for the female end of the hazard flasher loom for a 1989 110 Hicap. Per my post yesterday, it's melted. Can you suggest a workaround if it's unavailable beyond replacing the loom? Cheers, Edmund (Couldn't see a way to PM you here...)...
  4. Edmund Butler

    hEEEElp!! Need the female plug at the end of the loom...

    Landy 110 Hicap ~ 1989 Seems my flashers failed, along with my indicators due to a short across two (or four) terminals in the female plug at the end of the, expensive and I imagine, ridiculous to replace wiring loom. This is made worse by the fact that a 25A fuse was installed on the circuit...
  5. Edmund Butler

    Replace 2 front doors for 110/Defender

    The 2 doors on my 1989 110 pickup are rotting at the bottom and in the middle from the aluminium/steel combination, rusting from bad repairs and weather, are somewhat bent, dinged & clipped from years of excited use and one doesn't lock. I want it as my business vehicle with decals... so does...
  6. Edmund Butler

    Spare wheel bracket ideas for 110 HiCap?

    Good work, Neilly! Thanks so much ;)
  7. Edmund Butler

    Spare wheel bracket ideas for 110 HiCap?

    Thanks, Alex. Most appreciated!
  8. Edmund Butler

    Spare wheel bracket ideas for 110 HiCap?

    Thanks Neilly, - in the same place it was originally mounted. That is, resting on the forward slope of the passenger side wheel well and attached to the vertical side of the tub.
  9. Edmund Butler

    Spare wheel bracket ideas for 110 HiCap?

    Can't seem to locate an original spare wheel bracket for my HiCap, either online or on my vehicle (!). Does anyone have any suggestions for modifying an available bracket? Cheers, Edmund
  10. Edmund Butler

    Wherever you go, there you are.

    Wherever you go, there you are.
  11. Edmund Butler

    Rear light guard - mesh: source?

    I reckon they look a bit flimsy, but thanks anyways. I'm protecting against stuff falling onto the lights while loading and unloading.
  12. Edmund Butler

    Rear light guard - mesh: source?

    Nice one Andrew, Tx. However the lateral attachment bar in this design is an issue with the extra lamp I've just attached. I could modify that I guess... hmmm... And I hope you're feeling better fella. You've been through the ringer. Furnituremaking not yet up and running but I'm still kicking...
  13. Edmund Butler

    Rear light guard - mesh: source?

    GAL022 shows no image but I'll call them. Tx. I've seen what I'm looking for on other Landies. It's more like this, but longer (this one is for Series) and with the screw tabs inside the cage:
  14. Edmund Butler

    Rear light guard - mesh: source?

    Does anyone know where I can find a pair of galvanised mesh guards to fit over the rear lights on my 110 HiCap? Cheers, Edmund
  15. Edmund Butler

    Hub seals weeping - replace plastic caps with bolt on, after market steel caps?

    Forgive, but doesn't the oil come from the axle/differential ("reservoir"), stop at the inner seal so as not to contaminate the grease and bearings on the other side of it and the outer seal prevents that grease from travelling along the splines and onto the road?
  16. Edmund Butler

    Hub seals weeping - replace plastic caps with bolt on, after market steel caps?

    Thanks James & Flossie. I'll keep an eye out for leaks and replace the ripped caps. Still not sure which set up they put on my (1989 110) truck. So if you have any idea, it would be handy to know... for when I eventually need the info!
  17. Edmund Butler

    Hub seals weeping - replace plastic caps with bolt on, after market steel caps?

    Thanks for the prompt response, James! The vehicle is a late 1989 LR110 Hi capacity. I read your response as: the blocked breather pushed oil through the seals without necessarily damaging them. Is this correct? If so, and I still get weeping oil from the cap area (none as yet after only 10...
  18. Edmund Butler

    Hub seals weeping - replace plastic caps with bolt on, after market steel caps?

    Hey folks, I cleaned my rear axle breather and its hubs stopped weeping. My mechanic says the hub seals must be blown for it to have been weeping out of the axle in the first place and they should be changed out. However, it seems fixing the breather fixed the weeping. Time will tell. Any...
  19. Edmund Butler

    Fitting a TD5 bonnet to a 1989 110

    I believe there may also be an issue with the striker/catch mechanism??
Back
Top