Search results

Had a look , as you say no synchro on 1st or 2nd and brakes a lot of effort. There were a few issues with it I wasn't sure about. One of the things was the play in the steering like a boat, seller reckoned that was as it should be ! I don't expect modern car drive ability but is a lot of play...

Okay cheers for that...appreciated

Yes I can , but I'm looking at an image of the plate online and with the edging and protrusions I don't have access to the tools for this so I'd likely buy a front plate.

The front centre panel that the headlights goes through looks rusted out from the bottom ! I priced these about 250 quid. Is this a difficult fix ? I'm pretty handy, can weld , rivet etc

hi, I have the opportunity to buy a local SWB 1960 series 2 on a galvanised wig chassis, with galvanised bulkhead 2.25 petrol. MOTD and running. I've only seen pics so far and it looks like it's going to need a fair bit of work to tidy it up. The current owner is looking for 4.5k which looking...

Had a search online but cannot seem to find an answer. Have a 1998 D2 TD5 project which at some point has had an engine swap to P15 or 15P. The AC hoses have been left unconnected and I think from the fittings on the hoses it looks like previous AC pump must have been a Sanden opposed Denso...

Engine is toast compression down number two cylinder not ecu, injectors or loom etc resulting in misfire and plumes of never ending blue smoke, rings for sure....................Im looking for a donor car, I had wondered about ecu, immobiliser etc but now I know, thanks for all the answers...

I have to bite the bullet and swap my engine in my TD5, I'm going to tackle this myself but have a few questions. I plan looking out for a whole donor vehicle. Will a donor engine just plug and play or do I need to change ecu/electronics ? What about immobiliser ? Coding of injectors ? Really...

cheers Mark thanks for your reply, that's maybe what's going on, I suppose I,d assumed that the injectors would be in very tight, but like I said number five is slightly less tight easily going in and out by hand. There are no other symptoms of a crack. well not yet anyways..........cheers

thanks James I know, what I was asking is can anyone think of any logical rationale why it doesn't ?????????

I've been replacing injectors seals and washers. I noticed that injector in cylinder 5 did not have a tight fit like the others, its so not tight I actually wondered when fitting the new o ring if it would seal ! Why would injector 5 not have such a tight fit ? No cracks or sign of any cracks...

Cheers Mark, all good advice, Ill be speaking to the diagnostic guy tomorrow , not sure what equipment he's got but he seems to know his stuff. Appreciate all the advice. Note what you say about re-installation and I have all the tools :-)

okay cheers bud, love the dog, I had one myself a few years ago but I live next a railway line and one day it sneaked through the fence to get to something it could smell and well that was that.........great dogs.

going to get a gut to check them with diagnostics, like griff says then ill know for sure !

I spoke with a guy who strips hundreds of engines, he said he had never seen them mixed, question is why would you mix them ? would that not just make life more difficult if its higher pressure ??

oh well then that muddies the waters a tad !!

lol, thanks Griff and Mark, it looks like the green injector is a swap, someone who should have not been near the rocker cover and who would know this started talking some gibberish about "injector 1" when I turned up to collect the vehicle and I think they thought I had forgotten about the car...

Thanks for the answers lads. Firstly let me explain my situation re injectors. I have a 1998 engine that was running fine 14 months ago. I know the engine has been well serviced to this point and even though 250k miles it has good compression. Unfortunately there was no security where the car...

cheers Mark thanks for the reply, I did find a site where someone cited 2-2.5 ohms across the board ! anyone else know ?

Hello. Can anyone tell me what the resistance should across the five injectors on a Td5 P10 engine. I have a new Disco 2 project that is running like a bag of nails, I checked it this morning and am getting (ohms) 1.4, 2.1, 2.2, 2.0, 1.3 !. I thought maybe number 1 and 5 were dodgy and also...