Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. SamA90

    Freelander 1 [No Longer] Wanted. Complete dead or alive freelander 1 td4 - STILL LOOKING

    http://www.ebay.co.uk/itm/-/121875494854?roken=cUgayN still looking? need to shift mine
  2. SamA90

    Engine Seizure

    Nope, didn't come on until after we ground to a halt
  3. SamA90

    Engine Seizure

    Seen some used 2.0 Diesels on eBay for few hundred quid, which isn't too shoddy! Just left a message with Kent 4x4 Centre for some advice, so hopefully he'll get back to me soonish. I've never heard of a chain going before...but I guess these things happen! I suppose, at the very least, it...
  4. SamA90

    Engine Seizure

    You are correct, TD4. How would I tell if it's crank shaft failure? When I take the oil cap off and look inside the engine, I can see the bottom half turning on ignition, but the top half is not...
  5. SamA90

    Engine Seizure

    Yup, the news I didn't want to hear has come down the line. Broke down the other day driving to work, nothing abnormal on the run, bit of vibration in the clutch pedal which I was discussing in another thread (thought it might be the flywheel) but it would seem that oil has not been distributed...
  6. SamA90

    Freelander 1 My Truck So Far........ (1st landy)

    I also thought this when I bought mine 9 months ago. Since then, VCU has gone and DMF is about to go (110,000miles, so it's had a good run!). Also, some little sh*ts ripped off my rear wiper arm :mad: Alas, wouldn't be a Landie if it didn't need fixing every few months! :rolleyes:
  7. SamA90

    Dual Mass Flywheel Failure

    Also, this is a good price right? £390 inc VAT for the Britpart kit http://www.paddockspares.com/da6250-td4-flywheel-conversion-kit.html
  8. SamA90

    Dual Mass Flywheel Failure

    How are you getting on with the Solid? I understand that pulling away will be more of a kick in the backside than usual, but beyond that, is there much difference?
  9. SamA90

    Dual Mass Flywheel Failure

    Gonna bring this little thread back to life! My TD4 has developed a knock when I depress the clutch pedal which I can both hear and feel through the pedal. It seems to be at the same rate as the revs. Also sounds like I've got 2 diesel engines under the bonnet... From what I have read on this...
  10. SamA90

    Recommended garages in Shepway area

    Hello Kent & Sussex people, I am fairly new to Hythe and was wondering if anybody has had any good experience with local garages or specialists with their Landies. Got a few jobs that need doing and want them done right! ;)
  11. SamA90

    Freelander 1 Rumbley at 40mph

    I'm pretty familiar with Bell now, spoken to one of the guys there. My ponderment is...do I get a refurb VCU for £200, or get a new GKN one for £280. Can the refurbs be considered 'as new'?
  12. SamA90

    Freelander 1 Rumbley at 40mph

    On a fairly related note...if I'm buying aftermarket parts i.e. the bearings, props, VCU...what's the best brand to go for? If I get all GKN, it's going to cost in the region of £900. There are some other brands on www.island-4x4.co.uk (my local parts dealer) such as Bearmach and some genuine LR...
  13. SamA90

    Freelander 1 Tightening the handbrake

    Gotcha. So it's a case of identifying the brake with the dodgy return spring and replacing?
  14. SamA90

    Freelander 1 Tightening the handbrake

    Hi! I'm starting to get into this "fix it myself and avoid having my wallet assaulted by mechanics" malarkey..atleast, for easy jobs that don't require any actual knowledge! I've had a quick search of the previous threads and couldn't really find anything that was of help. I've got a bit of a...
  15. SamA90

    Freelander 1 Rumbley at 40mph

    After checking out my picture again (the one attached to a post above), I think I can see the circlip...so I'm guessing that the CV and front prop are all hunky dory. Bearing in mind that the bearings were cheap s**t (I think they were £15 each) and got smashed to bits after about 10 minutes...
  16. SamA90

    Freelander 1 Rumbley at 40mph

    I don't recall seeing a circlip, but it may have been disguised in the mass of grease. It's all in my dads garage at the moment, so I'll have to check it out again next time I'm up there
  17. SamA90

    Freelander 1 Rumbley at 40mph

    Yup. Going GKN. It was a stupid move in the first place, seeing as even top quality bearings and exactly the most expensive part of the drive train!
  18. SamA90

    Freelander 1 Rumbley at 40mph

    It may have been sitting out of the cup where I took it off. Aren't any signs of damage that I can see.
  19. SamA90

    Freelander 1 Rumbley at 40mph

    Thanks hippo, got it off now...not really sure what I'm looking for
  20. SamA90

    Freelander 1 Rumbley at 40mph

    I can't seem to get the CV away from the shaft...how do you get it off? Wammer job?
Back
Top