Search results

hi was wondering if anyone could help, I have leak where the power steering pipes go into the box. I have replaced the 4 o rings that go on the power steering pipes but hasn't made a difference :(

Thanks for your reply, so you don't use all 4?

Found that I have a leak where the two pipes go into the top of the steering box, tried to change the o rings but didn't work so I've ordered the genuine o rings from landrover and have been told they come in a packed of four 2 green and 2 brown. I know 1 of each colour goes on the recessed part...

Just an update, got the reset done and the light hasn't come back on, with having the old hub and old sensor on :) road test showed that three wheels reading at 22 and the one that I've been working on reads 18 when moving. Not sure what that means but at least it looks like the problem was a...

Think I'll have to call down the local garage tomorrow and see if he'll reset the faults for me and see if that will work, Just hope it's not the ecu u/s from changing a wheel bearing

Thanks for that, did the testing and there was no change in resistance when wriggling the connection or loom just stayed at 954 ohms So I have the old sensor and old hub back on and the lights are still on :( after test drive Don't suppose you have other ideas to check?

just a quick question is there any way of testing with a multi tester the male connection that goes into the female connection of the abs sensor?

Hi, thanks for your reply. Is there a way to check the reluctor ring?

Thanks for the reply, will put the tester on the sensors tomorrow. Thinking about putting the old hub back on to see if it is a dodgy new hub. If I did put the old one back on and didn't put the brake disc or cal back on would it be possible to jack each wheel up and start the engine and let it...

Was the cheap one from island4x4, first reset the lights came on about 400 yards and second reset almost straight away. Replace the new sensor with the old one and it's made no difference :( will I need to reset it? Or if it was the sensor it would of knocked the lights off? Thanks for your time...

Birtpart

Thanks for your reply, no the sensor is a new one that came with the hub. Is there away to eliminate the new sensor? And will I need to have the ecu reset everything I try to eliminate something or will the the lights just go off without having to reset anything? Thanks

Hi all, Just having a night mare with my td5 discovery, just replaced front wheel bearing/hub and now have abs, tc and hill descent warning lights on :( they weren't on before I replaced it. Have had the code reader on down at my local garage and the fault is shown as a intermittent abs sensor...