Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. A

    TDV8 wiring diagrams

    Thanks for your reply. Before I splash out £20 for a hour access does anyone have the main harness to seat harness wiring connector diagram for a 2010 tdv8? Thanks
  2. A

    TDV8 wiring diagrams

    Hi, Can anyone please help me out with some wiring diagrams for a 2007 TDV8. I have Rave and it has wiring diagrams but the main harness to seat connector page is not the one I'm looking for. My Rave manual shows a single main harness connector plugging into the seat plug, however I need the...
  3. A

    L322 EAS front left air valve

    Just what I was looking for, thanks.
  4. A

    L322 EAS front left air valve

    I don't suppose you know the measurements for each wheel do you? That is the distance from the bottom of the wheel rim to the wheel arch. Mine are currently about 750mm on the front and 752mm on the rear and i'm using 19 inch wheels? Are these the correct measurements? Is there anywhere that...
  5. A

    L322 EAS front left air valve

    Yes , it's freely downloadable on the Web and generic k-line interface is all I use.
  6. A

    L322 EAS front left air valve

    Yes, you can calibrate air suspension using BMW INPA software. Just select e53 model and away you go. No need for forking out for allcomms as INPA and DIS does it all. 😀
  7. A

    Range rover l322 2003 to 2010 rear led light upgrade

    ??
  8. A

    Range rover l322 2003 to 2010 rear led light upgrade

    Any help hippo on the design on the interface you made? [emoji57]
  9. A

    Range rover l322 2003 to 2010 rear led light upgrade

    Where you find these 2010 LED lights so cheap?
  10. A

    L322 EAS front left air valve

    I will give it a shot and report back as I have full DIS on my laptop.
  11. A

    L322 EAS front left air valve

    I've seen on another forum that you can use BMW DIS for various things with the range rover, has anyone got any experience with this? http://www.pistonheads.com/gAssing/topic.asp?h=0&t=941897&mid=0&nmt=Converting+a+2003+Range+Rover+to+2010+
  12. A

    Will sport front bumper fit l322 HSE?

    Very purist indeed. Every one to their own. I was just wondering what my options where if I was going to upgrade my front end. I don't know what it is but I just thought that the sport front end looked more appealing than mine and it seems a lot more sport auctions exist on the bay of e. I do...
  13. A

    Will sport front bumper fit l322 HSE?

    Also, what are the differences in the front end between the sport and L322 HSE?
  14. A

    L322 EAS front left air valve

    But in terms of functionality does the hawkeye do the same things as the all comms like calibrating suspension and programming modules?
  15. A

    L322 EAS front left air valve

    How does the bearmach hawkeye compare in your opinion? Does it provide same functionality as the all comms?
  16. A

    L322 EAS front left air valve

    How is the icarsoft i930 in comparison?
  17. A

    L322 EAS front left air valve

    Thanks guys. Just need to recal my air suspension now as it looks ever so slightly not level. I had it MOT 'd and I need to get hold of a rear stabiliser link bar and the height sensor bar also (not the plastic arm) for the off side. When I've fitted these I will complete an eas calibration so...
  18. A

    L322 EAS front left air valve

    Thank you, it's now sorted. I've recently replaced the engine and I had put the sensor back on 180 degrees rotated. Instead of the sensor arm pointing outward it was pointing inward. Nothing g was damaged except the air suspension inactive warning was on for a short while after I corrected the...
  19. A

    L322 EAS front left air valve

    Mick C Any update?
  20. A

    L322 EAS front left air valve

    Any further advancement on this ? It looks like my front near side corner is low down and the rear of the car very raised. I'm suspected the air bag may have gone in the front nearside. [emoji20]
Back
Top