Search results

I have these screws holding my floor panel down but they have routes both sides. Anyone have any idea of part number? Plus any idea how I can get them out?!

I got lucky with the boss and found a 48 spline on EBay for £20. Not entirely sure what type it is.

Fitted me new Quark that finally arrived after 3 weeks wait from Momo. It's obviously smaller diameter so takes a little more getting used to but feels good.

Finally got round to fitting the sliders I had galvanised. Look good and decided to leave silver.

Got mine back today......got in touch with a local metal yard and they threw my Sliders in with a huge order......gave the guy £20 and a bottle of decent red! Well chuffed. Just need to re-tap the holes in the brackets and treat myself to new bolts.

Litch - do you have a pic with your galvanised sliders on your Landy? Just wondered how they look. Ta

Yep all the 10mm ones

Hopefully this will help

I found a new replacement skin for £75 any idea how much it would cost to remove old skin, fit new skin and repaint? Thanks

Near Milton Keynes but would travel 50 miles or so, maybe further if I could get all 4 doors done at the same time.

Has anyone had a door resprayed recently? Just wondered how much ££ to rid some oxidising, take some dings out and respray.

Not on my phone. but can put the brackets back on the sliders I'm cleaning up and post them up tonight. When I stick them back on I might just cut a 10mm slot into the front bracket so I don't have to remove the 120mm bolt all the way out form the outrigger again.

I took mine off at the weekend. There is basically a bracket around the mid length of the slider with 3 x 10mm bolts and then 2 more 10mm bolts at the front end. The bracket at the front attaches via a rather long 10mm bolt (about 120mm long). If you want to remove the bracket then you'll...

I think if I had the choice (I didn't this time) I wouldn't have placed it that high on the doors.....I might do away with it when I get each door resprayed and just keep the chaequer plate on the front wings.

After I blast them would they need polishing / finishing?

Hi, I have black chequer plate all over the place on my 110...any idea the easiest way to get this back to silver, assuming it simply powder coated as some of the black has chipped off. To replace it all is going to be around £150. Also, does anybody have an idea of how much it would...

Thanks, great reply. So basically due to the minimum value the sliders would cost 100 squid for the galvanising. Have you ever compared the cost of powder coating in silver?

Ok so today I fitted some new side steps, mainly to allow the kids to get in and out! I had rock sliders on before and they were in pretty poor condition so I thought I'd take them off to have a look. All in all it was a pretty easy job, but one thing I didn't realise for some reason (well...

Had it for around a month, love it. Doing a few things over the next few weeks. Remove the rock sliders and fit some nice new side steps to help the kids get in is the first.

Awesome, thanks for your help, this is a job for Saturday and daylight "!