Search results

Hi folks I got a dizzy coil leads and plugs from simon BBC fitted them and the landy ran fine so took it to work (90 mile round trip) and when I arrived at work and it was running lumpy and conked out this got worse on the return journey I noticed that the rev counter was flicking down then back...

thanks think I will give him a call

Well I think I've proper poo fingered it! I tried to remove the small cog wheel which was stopping me from removing the backing plate by taking the sur clip off the wheel and applying some pressure from underneath the wheel and it went ping. The outer distributer shaft came off - I think there...

I've taken the three post bolts off but the little cogged wheel stops me taking off the plate off, theres a little black plastic inspection plate on the bottom near the cap clip and I think I can see the weights inside and it does look like the spring have come off

do I need to take of the surclip on the rotor and then take of the little wheel then remove the plate with the contact to be able to get at the springs

market rasen ,lincs

hi I have been trying to sort it out and I thought I would find tdc before I started taking the distributor to pieces there wasn't any obvious marks on the crankshaft pulley so I took out spark plug 1 (passenger side front correct me if i'am wrong) and turned the crank with starting handle until...

I was thinking it might be better to replace the whole unit does anybody know if powerspark are any good

does anyboby know or have any pictures or anything to help me strip and rebuild the distributor all help greatfully recieved

Hi do I remove the sirclip on the rotor and try to remove the wheel thing or take off the stuff around it

Hi thanks for the help here's some photos of the distributor

hi everybody i was hoping some of you might be able help me out. I have got a 3.5 v8 110 defender 2 door and it was starting to run a bit lumpy so i decieded to investigate and began by looking at the distributor i removed the cap and looked for signs of arcing and then wiggled the rotor arm...