Search results

PM sent

I fitted a shielder bulkhead and it is fine. I was expecting to have to modify it mind. Saying that I did have to open up the holes for the door hinges but that was it.

Don't know anyone in the NE to carry out work, but where abouts are you? I'm in North Shields and I'm currently rebuilding my 90.

I drilled mine out and bought new ones

I removed the anti tamper bolts

I repaired mine and parts alone cost £500. I then bought a new galvanised one as I wasn't happy with the corrosion I couldn't get to beween where the bulkhead is sandwiched together and spot welded.

I cut mine down and only replaced the bottom and used tiger seal and rivets

I bought a built up galvanised rear door from them. I have not fitted it yet but looks very good. The thing for me is they don't send confirmation email when you purchase anything and don't notify you when its coming, although the delivery company did. They don't have a phone number but they...

That's the one I currently have. I had to modify it for my pedal box lock. Now I'm fitting a new galvanised bulkhead I need to modify again and sure I read somewhere about using the one from a TD5.

I'm going to fit a later bonnet release cable as below to replace my old one 1998 300Tdi. I know its a Britpart part but I've already got it. I will change it if it's crap. Has anyone done this, is it worth doing and anyone got any photos of where to put it (TD5 owners, where are yours fixed?) I...

That's what worries me AI203 - is that rioja red? as that's what mine is

Thanks for the rely guys. Did you do the painting yourselves or get a paint shop to do it? If the paint shop done it how did you get the like of the roof, rear tub there?

So I currently rebuilding my 300Tdi 90 and was planning on spraying the panels myself then fitting to the 90. Well after reading about 2k paint and not having anywhere to paint it other than my single or back garden (in a gazebo with sides) I've decided to put it back together and get a paint...

They're the best I have. I didn't do a thread. I repaired then bought a new galvanised one. I would see exactly what needs doing as mine grew arms and legs and cost me about £500 in parts. Where the steelwork is sandwiched together would have caused problems further down the line I suspect hence...

Any good for you

Applecross pass - that's what he said:)

Bump reduced price

I got mine from Demand too and although I haven't fitted it yet it is excellent quality.

Perished rubber hoses? They don't like the ethanol in the fuel

Got it from shielder. I know they got a lot of bad feedback but the bulkhead is fine. I have only fitted it to chassis but haven’t hung anything off it. I actually purchased through paddocks