Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Littelwill

    Disco 2 how do I do a decent how to for the how to section?

    +1 I think you'll have to write it out then if it's really good it'll get moved over
  2. Littelwill

    Hello

    Hello and welcome!
  3. Littelwill

    Hello from the Shires

    Hello and welcome
  4. Littelwill

    Disco 3 (LR3) Limp mode

    Mine did this. Was the turbo actuator. I free'd it off and not had a problem since.
  5. Littelwill

    P38A Strange vibration...

    Is it definitely a drivetrain vibration? My old p38 developed a vibration at certain revs that went away when N was selected. I honestly replaced and changed every moving part I could get my hands on only to find it was the roof skin had come away from the body shell and was vibrating at certain...
  6. Littelwill

    Hi!

    Hello!!
  7. Littelwill

    discovery 3 full of lights on dash

    Your right there!
  8. Littelwill

    discovery 3 full of lights on dash

    As mentioned work your way through that list and hopefully you'll find the cause. Mine turned out to be the compressor and that too had recently been "refurbed" new seals etc
  9. Littelwill

    discovery 3 full of lights on dash

    Ahhh the famous Christmas tree lights. Unfortunately that is likely to be the beginning of a failing air compressor (mine did the exact same) over time it will get worse and the lights will come on more and more regularly as your drive. Until the pump gives up totally and they come straight on...
  10. Littelwill

    Other what have u done on ur disco today

    Fitted new suspension compressor as precautionary maintenance. Very easy job to be fair.
  11. Littelwill

    Hello!

    Welcome!
  12. Littelwill

    Disco 2 Wrapping

    It looks pretty simple but to get a decent finish it would take hours I fear.
  13. Littelwill

    Newbie

    Hello and welcome!
  14. Littelwill

    Not quite 175K

    That's impressive. Must be a good all rounder really if still on its original clutch it hasn't had a hard life :)
  15. Littelwill

    Other what have u done on ur disco today

    Tonight I changed the top aux tensioner pulley. No more squeal.
  16. Littelwill

    Other what have u done on ur disco today

    Disks and pads are really easy. Mines now had all four calipers change and new disks/pads all round. EPB adjustment is a pain but worth it
  17. Littelwill

    P38A Who in the South East can replace my heater matrix?

    Your dead right no dash remove. Only down side is you have to cut the dash support. Not ideal but after cutting it can be moved out of the way (loosening the bolt at the bottom allows it to swing or be removed). After doing this I drilled holes in the piece I'd had to cut and using a piece of...
  18. Littelwill

    P38A Who in the South East can replace my heater matrix?

    For what it's worth I had leaky O rings on my p38 and after trying to replace but being unable to remove the rounded sized screw I opted to to the Audi heater matrix conversion. It was super simple and only took a few hours. By doing the conversion you do away with the steel pipes and replace...
  19. Littelwill

    Other what have u done on ur disco today

    New drivers side front lower wishbone done and fitted a new rear calliper so the back didn't feel left out! No more knocks or scary steering.
  20. Littelwill

    Help to buy front wings ...

    Any chance you could repair with filler. Seems to work on older vehicles? Sand prime spray?
Back
Top