Search results

Thanks Standard, I will keep looking for a while and use your suggestion as a final option.

Recently purchased a Series 2a steering wheel from that well known auction site but turns out it is for the late model and not my early model which requires a threaded bolt clamp not lock nut. Does anybody have this type of wheel for sale or know of a work around to fit that later wheel to an...

Its taken an age to get this sorted, just too much going on at work, but after fixing the fuel supply issue it turned out the points were knackered. After fitting a distributor service kit she now starts every time; only problem is that it will not go into gear. But I will start that little saga...

Thanks guys, lots to look at. Will post the solution when I've nailed it.

I have this amzing 2a with a 3 petrol engine and since buying last spring has run brilliantly. But now she just doesn't want to start. It is definetly a fuel problem which I thought was the fuel pump; so I changed it for a new one but nothing. Then I took the weber carb off and took it to a...

The Landy cut out the other day and it would appear that the in-line filter to the carb was practically empty of fuel. It would run for a few seconds if I used the pump handle to refill the filter but then cut out again. So bought a repair kit for the mechanical lift pump and at the second...

Thanks all, I'm going to buy the Owners Club type to see if it makes life easier. Paddocks put me onto the Door Top manufacturer who were very helpful. Two tips were to bolt the door top on to the bottom as doing up the nuts often pulls the channel down and secondly to prise the top joint, at...

Anybody used Paddocks Window Channel. Read all the posts on best way to fit existing glazing into new door tops and all seemed cool. But Ali spacers and any type of fixing make the window impossible to slide. If I remove both window slides gracefully. Design fault? badly fixed by me? similar...