Search results

Thanks for all the pointers guys. I had tried to fit them and couldn't get them past. But jacking up the chassis did the trick and now they are one.

Looking to fit my diff guards and am a bit stumped as to how to get the front one on. I have the slide on type that clamps onto the diff (http://www.paddockspares.com/pm121-rover-axle-diff-guard.html) There seems to be what I think is an anti roll bar right in front of the front diff and cant...

Sankey Camping Trailer | eBay Not sure if its what your after but a friend of mine is selling his Sankey Camping trailer

we did all checks, ran the engine, checked battery, check everything else. and no luck. But then suddenly it came back to life after leaving it over night. Very strange and frustrating and still no clue what was wrong. Thanks for the tips though

Hi all. Fitting an auxiliary fusebox system into a friends L200 today (yes, I know its not a Land Rover, but all the Mitsubishi forums have failed me and think it is a generic electrics fault.) We needed a switched ignition feed to trigger a relay and we tried to gain this from the stereo...

Hi All. Just reading the Jan 2015 LRO and came across this picture of a Landy... It appears to have a cargo net dividing the front seats from the rear load area. This seems like a brilliant idea. I was wondering if anyone could shed some light on two things for me... 1) what kind of net it...

Bring back a dead post I know.. But any chance of letting us know what size the really useful boxes were. Loving the idea

Thanks for the suggestions. I disconnected the linkage, but the selector still would not stay in low ratio it just jumps back out. So I think it must be a problem with the transfer box rather than adjustment of he linkage. I took the selector box off the top of the transfer box (the one held...

Having a problem with low ratio on my 1988 2.5 petrol 90. When you move the transfer leaver to low ratio position it jumps straight back into neutral. This is with or without the engine running. You can hold it in low ratio position (but have to use some force) and if you let out the clutch...

Thanks for the offer, but not quite suitable for what I need. Thanks Anyway

AlbertDefender90, what kind of condition is it in/what holes does it have cut out?

E Reg 90

Hi All, I was wondering if it was possible to fit a TD5 Defender Centre Console into an older Defender? Thinking it as a cheaper alternative to something like a raptor dash/mud console. Also, how much would one of these cost second hand? I cant seem to find one on ebay...scrap yard maybe...

Thanks everyone. New condensor and good as new. Would never have put such an intermittent problem down to part of the ignition system. Thanks again jackatheback

Hi, will have another look at ignition components at weekend. To answer some of the questions, Yes weber carb and Lucas points. No obvious induction leaks, but any tips for checking, likely weak spots welcomed. New dizzy just before I bought it 12 months ago and leads. Done about...

Thanks for the quick replies. Yes the timing was correct when I gave it a service a few months ago but I'll check it again. The fuel filter. I wasn't able to change that when I serviced it. It is under the drivers foot well and looks to have been waxoyled over a number of times along...

Hi there. My first post. I have a 2.5 petrol 90. 1986 vintage. I've had it about 12 months, whilst it is never going to be an object of desire it was a very good price and is a very sound unmolested truck. All has been well for most of that time. Runs well and starts first turn of the key...