Search results

First which pins in connector C0230 Which pins do I use for the disabling jumpers Instrument panel ABS light ? Once upon a time I saw this in an electrical manual and now cannot find this. Not 4.19 thru 22 my book pgs. 177 - 178. Co233 slot 14, 15, and 19 have wires but not in manual which...

Keep getting leaks in this factory oil cooler so I decided to re-engineer it. I am using AN fittings and stainless woven hose. Due to my location supplies trickle in; part is back at machine shop to tap and thread external ports; then the install. I purchased a complete change of bolts, screws...

After the horn blowing at 2 am, it took me taking the battery cable loose to stop it. Next day I pulled the horn fuse, this was not a real solution. I found it was an ECU alarm; I have a nanocom, found no error codes logged, looked at the lucas 10AS none logged. Put the (ECU Alarm) fuse back...

Just a few ago; 2:45 am I was awakened by the horn blaring. This defender does not have security enabled on the as10. Due to the small hurricane we just had pass over it has rain for a few hours. I have water in the floorboard.so something windshield or vents need tending to. Any tips on what...

Awhile back I took on a tank full of diesel contaminated with some type of solvent. Here we loose fuel pumps regularly to sand, but this was entirely different. I had to replace the VDO fuel pump and sent all 5 injectors to England for re-build since there is no one here equipped to test or...

This is from an on going issue, I have recently replaced a lucas 10as, and an ecu. re-programed the 10as, disabled all disabling. Key in the crank position all instrument lights on, no engine disable light illuminated. I am at the point of needing access to the new ecu to re-map it; I get the...