Search results

Hi replaced my clutch recently due to a thrust bearing failure. replaced spigot, clutch and pressure plates. replace the fork with a heavy duty one. I've only driven about 100 miles on the new clutch and today the clutch faded and eventually went to the floor without any pressure. the res is...

I need to weld the top of the chassis on my defender 110 CSW and removing the middle row seat box would help as I do not want to lift the whole body. Any suggestions on how to remove the midddle row seat box?

I'm fitting a new clutch on my defender 200tdi. The engine is out and the release bearing had failed. Bought a new clutch kit by AP (used to be borg &beck)which includes the release bearing from paddock. I've read some horror stories about bad quality release bearings. Does anyone know if the...

Help! I'm trying to remove the engine from my defender 200tdi for a clutch replacement. I've disconnected the electrics and fluids and ready to pull the engine out but I can't get the engine mounts off completely. on the near side mount I've undone all all the bolts but cant get the mount off...

I'm considering buying an engine crane for work on my landy 200tdi. Is a 1 ton crane enough or should I go for a 2 ton one.

Replaced master and slave cylinders recently. while out locally I was unable to engage 1st gear and then after some time the 2nd. Eventually managed to get it back home on 3rd but by this time although I was able to press the clutch pedal the clutch would not release. Thinking it needed to be...

i'v replaced master and slave clutch cylinders on my defender 200tdi. Ihave also replaced the rubber pipe that connects to the slave. Noticed that there is a small leak where the metal pipe from the master attaches to the rubber pipe. I have tried tightening (with difficulty as space is limited...

can someone please suggest a solution to my problem below: Decided to replace the clutch slave on my defender 200tdi. the old one came off easily but as the push rod was not held in place with the plastic clip it came off from its normal position. However, I'm unable to pull the push rod out...

:)