Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. B

    TD5 Clutch Switch

    Looking for a new TD5 clutch switch. Cannot locate any new stock through the usual outlets. PT. No. MSK500020 (normally closed). Anyone got one?
  2. B

    Clutch or gearbox crunching noise

    My TD5 has developed a strange clutch or gearbox noise that comes and goes without any pattern. Cold or hot does not seem to make any difference and the noise occurs typically once every 20 miles or so (I only do short journeys). The only time the noise happens is when I have depressed the...
  3. B

    Clutch switch reverse operation!

    My discovery TD5 has poor throttle response most noticeable at low revs. I have just looked at the clutch switch which, according to Rave, should be normally closed. Mine works fine but is normally open. I removed the connector, shorted the contacts and took it for a spin. Throttle response...
  4. B

    Whats this pipe?

    I have a small black (LPDE) pipe that has a curved end that is totally open ended (not fixed to anything or plugged) that sits just above the fuel regulator on my TD5. Can anyone tell me what this is for?
  5. B

    TD5 Low on power and very noisy!

    I recently purchased a 2001 TD5 that very quickly developed severe diesel clatter and low pulling power especially at low revs. I checked the injector clearances, changed the MAF,changed the injector loom, cleared oil from ECU plug, by-passed the EGR and, whilst the top end power improved, the...
  6. B

    Hello

    Hi, Just registered to this great site. I am new to Land Rovers but not to Land Rover Engines. I now drive a Series 2 Disco TD5 as my main car but my real love is my Cobra replica fitted with a super-charged, Nos injected, 5.2 ltr Rover V8 built with the help of John Eales at J E Developments...
  7. B

    EGR removal disconnect modulator?

    I have viewed several kit instructions for removing the EGR assembly on TD5 units. Most kits simply blank off the now redundant vacuum pipe to the EGR but leave the modulator in use. There are a few kits that also recommend disconnecting the electrical connection to the EGR modulator. My...
Back
Top