Search results

Just a thaught im throwing out there. Ive got a 3.9 v8 serp thats lets say had its fair share of issues but thanks to you guys esp the senior members ive got it running at near 100% . My question is im running her on mine mineral 20/50 and the engine seams fine . I have been looking a lucas...

I have just fitted a tmaxx split charge system to power a second battery. The second battery is running the lights and a few other bits. I have a winch now and im not sure which battery to connect it to . What do people think . Thanks

I need some help with the a winch ive bought , its a super winch EP9.0, I have no instructions so a bit stuck ,the wiring is a bit wrong to me but I need to find out wich wires from the selonid terminals go to what terminal on the motor, there are three wires on the top of the motor F2...

Hi probably a stipid question bit I want to fit a vacuum gauge to my 3.9 efi v8 . Would I connect it to the pipe from dizzy to plenum chamber . Or would this affect the dizzy .

I have a wobble on the crank pulley . I have put it on as tight as I can using an air gun but still wobbles so I went out and purchase a second hand one and that wobbles too . Any ideas . Could it have anything to do with the woodruff key located on the crank. ??? When I put it on there is a...

Hi . Ive got a 3.9 v8 serp engine . I have rebuilt most of it and put loads of new parts in her . But I cant work this one out . The oil is 20/50 and gives 27psi cold and 0-17 psi when warm and idling goes to 0 psi .the engine oil light has not come on at all but shes tapping Not loud but im...

Hi . Just wondering if anyone knows of any lanes to drive in the Birmingham area .I just managed to get my v8 disco going going thanks to you guys on here. Ive owned a landy series and a disco for 3 yrs and never took either off road . Looking forward to seeing what there is around

Hi as from my last post i had a look into the wiring again and found that I have power to the wires to coil when they are disconnected from coil reads around 11v. when I re connect them to the coil I have no reading and the wires that go to coil are black single and white n blue going to two...

Got a v8 3.9 which aint starting recent rebuild and was running fine until it decided not to start. I have no voltage to coil ive lokked at the spider system and it's already bypassed . Turn the key and the fuel pump primes up . Its running a power spark distributor and the amplifier for...

Ive got a 3.9 v8 which has just had engine rebuild and was running great ish untill other day when it didnt want to start . It turns iver but no spark or power at coil . :confused:I thaught it was the immobiliser but after taking the dash apart I found it had been bypassed already . The two...

hi ive got disco 1 3.9 v8 1998, which refuses to start , it was running ok ish but now it turns over but no spark , I checked the voltage on the coil and its dead no power at all , been looking on google and found out about the dredded spider system behind dash and bypass it so took the panel...

hi its been a while since I was last on with my series now I got a disco v8 and regretting it lol. done lots of looking on google but need expert advice pls . prob is not starting it was running before it turns over ,,i have no power to coil thought it was the spider system, after taking control...

help massive problem,i managed to get the gearbox off today to hopfully change the clutch but on closer inspection i found the clutch and everything else was covered in oil :( it dont look like its from the gearbox so its got to be from engine , pls any ideas or has some one had this happen...

i been restoring my landy for about 12 mths, im neely finished when i realised the clutch is knackred:mad:,i just ordered a kit from paddocks :) it comes with the thrust bearing which in mine makes a right rackett, what i would like to know is, are britpart clutches any good and has any one got...

hi had problem with oil from hand brake so today i stripped down the drum etcc replaced the oil seal behind the hand brake back plate and new gaskit onthe oil catcher and the felt washer, all good put back together (not fun upside down lol) re filled with oil and now the leak is back:mad: its...

hi just joined today based in birmingham , got to get useto this its all new