Search results

I have a Tirfor TU-16 and i need a replacement handle for it. Does any one have a used handle they would like to sell? Or does any one know the dimensions of what handle should be? Perhaps i can make my own.

I need a little help diagnosing the source of a knocking sound and more importantly if it is a problem or not. 1989 Defender with about 400,000kms on it. New 300tdi motor and new R380 gearbox. The transfer box and the read diff is original. Front diff is a year old. Wheel hubs have all been...

I have a 2.5TD (19J) and because the LR is in Argentina where 200tdi do not exist and worn out 300tdi's cost US$8000, i decided to recondition the engine in Buenos Aires this past August-October; i drove out of the garage on November first. Pistons, rings, gaskets, and main bearings were all...

I need some good advice. Here is the situation: I have a 2.5TD (19J) engine that was recently overhauled and bored to oversize 40. The injection pump was replaced. The turbo was replaced, but with a 300tdi turbo and custom fitted oil lubrication hoses/pipes. After only 2500km the turbo is...

I want to buy a spare CV joint for my 1989 Defender 110, but there are two kinds of CV joints available; a 23 spline and a 32 spline. Without physically examining the old CV joints, how can i determine which ones i need? I am 10,000kms away from the vehicle, so looking at the old ones is...

I am taking my Landy on expedition and would like to add some security to it. Does anyone have any advice on some sort of basic immobilizer i could install? Some kind of fuel cut off? Has anyone done something like this? Are there aftermarket kits? My landy is a 1989 Defender 119 2.5TD.

I have a 1989 Defender 110 with a 2.5TD motor and a LT77 gearbox. I am a new owner to this vehicle, so am not sure what repairs/maintenance was previously preformed. The issue is: When the gearbox is attempted to be put into 1st gear with the gearbox oil cold, there is a loud high-speed...

I have a 1989 Defender 110 with a 2.5TD motor and a LT77 gearbox. I am a new owner to this vehicle, so am not sure what repairs/maintenance was previously preformed. The issue is: When the gearbox is attempted to be put into 1st gear with the gearbox oil cold, there is a loud high-speed...

Where can i find a snorkel for a 1989 Defender 110 2.5TD (J19 engine)? I have found kits for 200tdi, 300tdi, and td5.... is there any difference? what side of the vehicle should the snorkel be mounted on? it is a LHD.

I have a 19J in a 1988 manufactured Defender 110. I know that the 19J's manufactured in the early years have notorious problems with broken pistons and blocks, while in the final few years of manufacture Land Rover had solved this problem. I know that the pivotal serial number for this...