Search results

Hi everyone, Happy New Year! I'm dealing with a puzzling oil leak on my 300 TDI engine. Here's the situation: Initial troubleshooting: - I suspected the sump initially and resealed it - Even with no engine oil in the motor, I'm still getting residual oil drips - I've confirmed it's definitely...

Hi all, I am trying to drop the transmission on my range rover classic 300 tdi. I removed all bolts but have been struggling to separate the bellhousing and after more than 5 hours of trying everything from different heights and wiggling, pry bar etc I can't seem to get more than 1/2 inch of...

Hi everyone, I have an oil leak on the rear of the sump. My original sump was pretty dinged up and bent so I replaced it and resealed with Loctite ultra black according to instructions. However I am still getting the leak in the same place. The photos show the leak after resealing and no oil in...

Hi everyone, I have very odd clutch behavior. I recently did a VM to 300 TDI swap on a 91 RRC . I replaced the clutch with Powerspec from LOF, new throw out bearing, reinforced fork, 300 TDI rod, pilot bush and slave cylinder. I installed a new clutch line from pioneer. Have bled the clutch and...

Hi All, I recently pulled apart my VM on 1991 RRC and it's in a very sorry condition 😢. All parts are extremely worn and have decided to scrap it for a 200 tdi due to part cost and reliability. I have a 200 tdi from a defender with radiator, intercooler etc. However I want to know if the LT77...

Hi Guys, I have a VM 2.5 in a Range Rover with approx 230K km. It's loud, has blowby and a lot of vibration at idle. It can be hard to start ( 5-7 seconds) and when it does it doesn't run smoothly and smokes until it's warmed up. Because the engine was overheating previously, I flushed the...