Search results

I just swapped engines in my 03 v8 due to a spun main bearing and bad crank. I renewed the gaskets in the "new" engine and mated it in the Rovah. This was a running engine when I got it. However now the engine will not idle unless holding the fuel peddle at 1000rpms. I have swapped the mass air...

I have a 1995 D1, 138000 miles, This past august it developed a head gas leak. The heads were taken off and tested by a reputable machine shop, cleaned and die tested. L.R. gasket set was installed and all seamed well. Till this past week when I noticed there was no heat. My fist guess was a...

I have a 95 D1 w/140,000 while driving the other day I was pulled over and given a warning for no parking lights in the rain. I explained there on then got out and looked and sure enough no lights, I came home checked all fuses, none bad, the next day I inspected the truck and found that I...

I have a 95 3.9, just had head gas replaced and now its boiling over in the overflow tank. done compression test on each cyl. all are the same. it does this after bought 30 min of driving. oh yea 138,000 on the clock. is there something I am missing?

OK can anyone tell me what color paint is sapose to be for code RTC5979A??

I was just wondering how hard it is to find a one button key fob there in the UK. It seems as though they are quite rare here in the states unless you are willing to pay out the arse fer one.

I am looking for any ideas as I am all out, so any help is welcome. I have a 96 D1 that I have replace the master cylinder, and abs pressure reducing valve. I now have brakes when I pump them several times. However while driving or if left untouched for even a short period of time they seem...

Dose taking the sway bars off the front and rear of a 95 D1 make that much of a difference? And should you replace them to drive daily?

my 95 D1 with a 3.9 has an issue after bout 30-45 min. it boils over in the coolant jug. was told this is a head gas problem, and if so are they hard to do??

ok its been some time now but I'm back, I've added a 3" lift from OME and some bigger tires.

o.k. I know there is already a post somewhere on how to make a snorkel for the v8i, I just cant find it.

help I live in ohio, and am looking for a decent auto gear box, at a resonable price......

ok I have a 95disco v8i and when cold runs fine. but when it warms up it misses, caughs and sometimes dies when taking off, however after you get into secon gear or going nice it seems to run fine. I have noticed the exaust fumes to be a bit strong since this. if anyone could help that would...

today my 95 3.9 seemed to have a miss while driving. changed the plugs. still the same like the enjun was cutting in/out. noticed no leeks (of significants) but abought 100 yards down the drive I seen smoke coming into the cab. I stopped, turned it off, and by now its a smoke storm, so I dun...

I have a 95 3.9 v8i disco, yesterday I was changing fluids, when I changed the trasnfercase there was a small ball bearing (I sapose) on the end of the plug bolt. the oil looked fine (no shavings) but could tell it was old. so not knowing what I should doI put it back at the end of the plug and...

I have changed the ign. coil and still no spark. the rig turns over but nothing. anny suggestions would be great.

:confused: ok I have a 95 disco 3.9 v8, wich was traped in a flsh flood. water everywhere. I changed the oil, transmition fluid and gas(petrol), removed the plugs and blowed out the pistons. should I do anything else or try to start it?? thanks Jay

does anyone know how to mount a 46" farm jack to the spare tyre?? if so dou youhave anny pics???

does anyone know where I can order a set of mud flaps for my 95 3.9 disco. I'm not in a hurry to get them and will order out of country if need be, seeing as I live in the u.s., just think that $100.00 plus at a dealer is a bit much.:cool:

does anyone know the ofical name of the linkage on the end of the shifter that puts in low-neutral-high geer on the dif lock shifter. it has a pin that holds it in place on the transfer case and slides on to the shifter rod with a nut that holds it. mine has broken and I cant seem to find...