Search results

I am fitting new shocks & springs this week to my 110. I have caster correction bushes to also fit. Is it possible to jack the front of the vehicle and remove both front radius arms or will it cause the axle to move out of line? The reason I ask is I'm thinking of using one arm as a jig to...

Does anyone have any experience of OME Nitro Plus suspension kits?Just purchased a standard height kit to replace my tired old shocks and springs. Just interested in other peoples thoughts and experience/reviews. Many thanks in advance.

Looking to replace my rear quarter panels…the lower panels sat infront of the rear wheels and behind the 2nd row doors on a 110. How big of a job is it to do???

I have fitted my spotlights to the front of the Landy. I have completed most of the wiring less one wire….it is labelled Negative/H’Beam. Where should it go??? I’m presuming that if I simply wish to trigger the spotlights via a switch then it goes to earth??? If I wish to trigger the...

I have seen flanged drive shafts for later models but not seen anything for the 300TDI. I have a salisbury rear diff and looking to replace the drive shafts both front and rear. These seem a nice upgrade and reduce transmission shock/noise. However, not sure if they are even available for the...

What modifications if any would be required to run this size wheel and tyre package? Is a lift kit required? What about wheel spacers? What size wheels and tyres do you think these are? Many thanks.

Recently had my brake servo replaced and i have been informed this evening that i have no brake lights working. Could the two be connected? If so where is the connection i need to find? (Vehicle is a 110 300tdi).

I'm in the market for replacement brakes discs and pads all round and looking for recommendations for means of improving the stopping power. Do you guys have any disc and pad recommendations for heavy towing??? Thanks

Could someone tell me how I go about removing the interior trim panel on a 300TDI 110 CSW around the large sliding windows? I need to remove them to fit a bracket for a rear cargo shelf. Thanks in advance.

Can anyone help me out...... I am in the process of building my roof rack yet my defender is at my local specialist having some work done. In the meantime I would like to get everything ready for a straight forward fit tomorrow, yet without my defender I do not know how wide to set the legs as...

Hello guys & girls, I have a Defender 110 with 16x7.5 Boost alloys. I would like to hear your suggestions on which tyre sizes I could fit to achieve a more aggressive stance. Currently I have 235/80/16 tyres but they look skinny in comparison to some of the defenders in the area. I would like a...

Looks like my battery is starting to give up. On 2 occasions following cold nights it has failed to turn over my 300TDi. Following a jump of short charge it works fine. Due to this I feel I may well be in need of a new battery as I have yet to have to replace it since ownership (7 years+) so I...

What is the largest sized tyre that you can fit on a 110 with 7x16 Boost Alloys??? (Std ride height)

Possibly looking to purchase a rebuilt R380 gearbox and transfer box as my unit is starting to make some very worrying metallic noises. How much would you expect a specialist to charge for carrying out the work?

Going to fit some new LED headlights this weekend. They come with a daylight running light facility that operates of a switch live. Where is the best place to take this feed from under the bonnet? Want to try and make the install both neat and easy without having copious amounts of wire trailing...

I recently put my 110 into a local Land Rover specialist to have new front wheel bearings fitted as some of you will know from my previous thread. All seemed well until I noticed the usual humming drone from the front offside wheel when turning left at speed. I decided to jack up my front axle...

Looking at the possibility of retrofitting late defender seats into my 110 300TDi defender. I like the look of the Recaro's and was wondering if it is a straight forward swap or does some fabrication work need to be done to support the change. Wanting to possibly change both front and second row...

Having done some pre MOT checks myself I had identified that both front wheels had excessive play (gripping tyre top and bottom and at both sides and rocking). So i decided to put my Landy in to a reputable specialist for new wheel bearings and whilst I was at it I also opted for new uprated...

I'm always having to clean my rear quarter panel below my fuel filler cap as it is always dirty with what looks like fuel spillage. However, when filling up I never spill a drop of fuel. Can anyone help me out here? What is causing it?

Whats the best steering protection available? I'm liking the look of the Pro Trac steel item with recovery eyes. What are your thoughts?