Search results

Right, I have checked the old MAF with the Nanocom and it came up with fault 102 circuit low input. I cleared it and restarted but the fault returned. I have 2 brand new MAFs so I installed the first and tried starting, the thing just threw out black smoke and wouldn't rev above 200RPM and...

Hi Pete, Many thanks for that, I have done a couple of my latches (rear) in the past and I wish I had seen this video before! All the latches do what they are supposed to and the internal handles open the door easily, they just dont latch when you shut the door apart from the passenger side...

Just a small issue, I just had my MOT (passed nicely again) but I had an advisory regarding the front door handles (LH & RH) If you open the doors from the outside the doors close properly, however, if you open from the inside you have to flick outer handle to get the door to latch. Both...

There ya go :)

Have you tried changing Comm ports? From memory I think EAS Unlock defaults to Comm 1 (Keith will know) I have to use Comm 4

You have answered an issue I have had for years, never really looked into it though, my HEVAC has dimmed while pressing the brake pedal for years, I thunked it was normal :) Thanks Pete

Starts and then stops unless I give a fair amount of wellie, it then runs rough as rats, plugged in it runs fine and smooth apart from the random engine dying bit.

I think the MAF is the culprit, when going slow on a roundabout or junction the rpm is in the region of 700ish the MAF reading goes up and down from 25kg and when the car starts to “hunt” it goes down as far as 0 for a second or so. As soon as it jumps to 15 - 25 it takes off again. I remember...

They read as ok

I can't say I have, I didn't really consider that because she runs as smooth as silk up to and after these episodes

One thing to add is that it only (so far) does it at slow speeds, no misfires or hesitation when going faster, it does hesitate a little if booting it but then it always has so I usually put it in sport mode and it boots down fine.

HT leads/plugs are 2 years, coil packs as far as I know are AD 1997 :) I have had the old girl since 2010 and I haven't changed them prior to that my brother had it for 4 or 5 years and he certainly didn't change them. It does it either hot or cold, usually I open the door and just start the...

All other electrics are ok as far as I can see

The fuse box is pretty new TBH but I will take a look and see, I do have a spare to try too

Thanks Pete, so far no faults logged which is why I am scratching my head

I am not sure if anyone can point me in the right direction but I will ask. I have a 98 4.6HSE which has a random issue. Sometimes when starting it dies immediately or chugs a little and then runs fine (hot or cold) most times it starts and runs flawlessly. It also randomly stutters as if it is...

We all knew you would get it in the end :)

if I still had my equipment I would, it use to be my profession in the days of yore.....

Keith I am not sure if my memory is right but didn't Kurt sell the NRV's? I bought a couple of sets a few years back but for the life of me I cannot remember from who and I cannot find the invoice/payment details

Hi Keith yep, the green circled ones are for the prop as you say, mine was the same but I repaired it and bought a new part, I am a tad OCD with parts that are not there........ ;) Edit: BTR2942 - STOP-SPARE WHEEL STRUT