Search results

Thank you for the reply, didn't even think to take them apart! My pressure bleeder seems to work alright, but I'll be using the pedal next time to ensure I get full range of the master to ensure air is taken out of that, going to fit them next weekend, painting the new front calipers I got...

It's me again! Finally managed to find the courage to look at the rear brakes... I hate drums. Found that the wheel cylinders feel like sh*te and don't return when pressed, they go no pressure from the pedal until about 3/4 the way down the pedal, I think either air got in there and can't get...

So I replaced the O2 Sensor to ensure that was not it, and nope... It is still misfiring... I don't THINK it is consuming coolant since replacing that bolt/nut properly on the intake but super confused what could be making it misfire / failing the emissions... I would think it could be consuming...

Used the PScan to code in 2 new fobs as mine died the other day and so couldn't start the car for about a week...

Hello everyone! Looking for some information and input really. As a spin off from - https://www.landyzone.co.uk/land-rover/unable-to-bleed-brakes.398398 I've recently learned about the Brake Bias Valve, also known by many names ("Brake Proportional Valve", "Pressure Reducing Brake Valve" and...

Yeah I was going to do this, but if this doesn't work I have a feeling I will have another spin off thread about custom Proportional Valves on this car too :mad: 😂 No biggie! Thank you for checking

Good thinking, though I just installed new stainless steel Pioneer ones from Muddy Mods :(

@andyfreelandy I don't suppose you have any Proportioning Valves from the Freelander laying around? It could be the valves in there are failing and letting air move around? Honestly grasping at straws here 😂

No ABS module on mine, only part I have not really replaced / inspected is the Bias valve, I wonder if air could get trapped in there? I've tried to bleed it with both a pressure bleeder that I run at about 20 PSI constantly and using the foot brake 2 person method but the pedal feels like...

Well here we are again! :mad: News is news, still thought I'd update here. My thought with the lack of pedal was seized caliper guide pins, which after taking off both calipers, 2 of 4 were incredibly seized and 1 mildly seized, the last one was fine and worked as expected. The 2 seized...

Manged to replace the front calipers in hopes that fixes the lack of brake pedal... 3 of 4 guide pins were seized but yet after removal clean and reassembly the brakes still super spongy... there'll be more explaining in my dedicated thread :rolleyes: I'll be down for the meet still maybe...

Only key fob left finally died... and I mean it died no battery replacement fixed it, I've been meaning to replace it for a while now... Only noticed when I unlocked the drivers door went to open the bonnet because its a land rover at heart and proceeded to wake up the whole neighbourhood as I...

Well there's only one way to know which way around is better now... Line up on the start line...!

It would be best for the optimal ignoring, however, I keep it there to ensure others are ignoring including myself! Doh!

Seems they want it facing the front of the car... beats me as to why, but I'd go with what they say, they manufacture them after all, not me 😂

Nice to be recognised for my hard work! Better get some sleep so I can continue ignoring...

So to clarify the disc in the picture (provided it is not flipped) I would fit to the offside.

Well aren't the slopes there for water displacement as well as heat dissipation? I would in that case follow the way car and motorcycle tyre tread considering they rotate in the same direction. So to the rear of the car would make sense to me 🤷‍♂️ Thinking about it in a purely logical way...

Indeed both me and the car are abs-less :mad: I'll be with it this weekend, along with checking the front caliper guide pins too so will check this and report back :)

I haven't checked them no, but they've been replaced with stainless steel ones from pioneer so I should imagine they are fine. The hand brake had been a little weird, it seems very... tight, when I drive with it off sometimes going over bumps causes the handbrake light to come on and the hand...