Search results

If you have a registration it may help. Otherwise it’s a project worth £1-2k at the most. Can only be sold as spares if no v5 or vin plate

It’s a bitsa… Log book is a series 3 Engine is a TDI Plus side chassis looks like a galv type Will need a lot of work

Sounds mad for me but I do have blue bag panard poly bushes on mine. Could not get any others at the time. Do have super flex for for other bushes.

That’s a lot of play. Really tighten them bolts first. You can’t over tighten them as the metal center won’t allow this. If the above fails…. Take off panard rod off and check mounting holes. Check bolts are the correct size for the bushes. If in doubt just get some poly bush ones as it makes...

Get a big bar & tighten them up… Has the hole ovaled ? As for video. Upload to YouTube & attach that way

Go & find some young yoofs to race of the lights. Then plugs look good to me. It runs & drives. Enjoy it while the suns out

Or twist them with power

What are we ignoring?

Click on @kevstar icon & start a conversation Otherwise you may be spammed

Give him £2k that leaves a bit of money to sort the head out.

Ardcase. You have to store it once removed looks harder to get to pedals.dows not cover bonnet release cable lever. X-defend folds onto floor,quicker easier to use. Pity they can’t use an Oxford type bike alarm that if it’s tampered with it activates a siren.

Find the colour of the wire that comes off the bulb and work towards the switch checking for power. Not many joins to check. I normally check the main bulkhead connections & then by gearbox. Does your diff lock light work? Could you use the power etc to prove cable is connected & switch...

If I plan a route I never know if it’s good 1 way. Do look at contours when planning. Make a few notes about sections & if there is more about being better the other way you can reverse the map direction. Just need to remember road junctions & roundabouts directions don’t change using OS maps...

And sounded nice

Have RPI fully closed then? I see they had down sized but a few motors were out side when I drove past about 8 months ago

It does come with that part

Rear of HP injector pump for the fuel I . Spur is for the return form the injectors. I recon this part is still attached to the lift pump And just checked shed and not 1 fitted to an old pump

Badley made wheel arch extenders .. If something was that bad your rear tyres would show wear on the edges where the axle is tracking incorrectly.

The big blue relay is the hazard relay(also indicators) I’m thinking the others are Starter high beam Fog lights Fuel pump Glow plug will be a large yellow relay in the engine bay Have you got a fuse box cover?

Bring them both back.. you can always sell them if you want.