Search results

No valeo. Springs on friction plate had broken up and fell between friction plate and pressure plate jamming it up.

Took the box out today. Clutch springs on friction plate broken up. Only been in 14 months. New clutch kit fitted.

The gears on my disco will not engage when engine is running. Will go into gear when engine is switched of and will drive when started. No loss of fluid in resevoir, taken slave cyl off and it moves when peddal is pressed. Clutch fork not worn through,reinforced last time clutch was changed 14...

get some sheet steel and fabricate the inner wings yourself. Just follow the contours of the excisting wing and make sure you go back to good metal to weld to. I had to replace/fabricate both front inner wings both sills inner and outer. boot floor,rear wheel arches where door closes and wheel...

i have had clattering brakes for some time. They worked fine though, Just stripped the front end down and as someone was walking past they said i had a rubber pad missing of the back of the brake pad. The piston bites into it and stops the pad from moving up and down in the caliper. went and...

cheers i will check the pan hard rod and let you kmow how i got on

HI My 1995 300 TDI disco keeps wandering allover the road and has a vibration from the steering. I have changed the wheel bearings,swivell bearings and tightend them down. Its got gas shocks and heavy duty springs and a gas steering damper. The a frame ball joint was relplaced and theres no play...

Hi. Is it possible to overhaul a power steering box to take the play out? Mine isnt leaking but seems to have a lot of play in it. Tried tightening grub screw on top down but this only made steering stiff. Disco wants to wander around the road when going in a straight line.

Hi. Has the 300 TDI got the same steering box as the TD5? My 300 TDI has got play and was going to relpace it with the newest one i could find.

Hi can anyone tell me how to remove the boot floor? The old one is rotten a replacement has been bought. I know they are spot welded in but need to know were the spot welds are to drill them out. Cheers

Thanks will give it a try tomorow

Hi. Got another problem with my 300tdi disco. Is there a spring on inside the handbrake handle? Pushed the release button on my handbrake,button went in brake came off but button stoped in. Handbrake is not ratcheting. You can push button out from behind handbrake but as you push it in again...

Thanks will take off the handbrake tomorow and have a look.

No. Dint know it came apart.

Thanks for the help. Changed ujs today. Checked prop to make sure it wasnt seized. The vibration has got worse! Is there a spring inside the handbrake handle? The button on mine is stuck inside. you can poke it out but as soon as you push it in again it stays in. Started happening today when i...

Hia. Ive got a bad vibration coming from underneath my 300tdi disco. can also feel it through gear stick. anybody able to point me in the right direction?

Just to ad my peenies worth. i am a welder for a living and for £35 you cant go wrong. if youre just learin it would be ideal for you to buy. you did not say if it was arc or mig. you can weld the chasis on a landrover with a arc welder just takes more paitance and skill. a arc welder is far...

thanks. thats a job for next weekend then

what are the benefits of cleaning out the intercooler?

how much of a job is it to change gearbox on a 300tdi discovery? mines vibrating and knocking like mad. Got loads of plat in it to.