Search results

Not quite sure what you mean but looking at both sets of diagrams you can see the connectors(C) that the wire connect through the other number correspond to the pins but just look for pink and orange wires. At the top of the lower diagrams the dotted lines S2009 and S2007 are splices (all wires...

Actual wiring The "C" are the connector numbers should assist in finding each end of wires, this is central locking which also integrates into theft system.The wires you are looking for are the orange(O), and Pink (K) ones

Diagram from Rave for routing of harnesses

I think you will find that the earth wire to the cluster that goes out is broken or corroded. What is happening is the power is going to earth via the other bulbs in the cluster, but when you turn the lights on you are losing the path because you have added the lighting power.

Attached pdf of foglight wiring from Rave... sorry it appears to be empty, I hate win10

Check where the wires are crimped into the terminals (at the plugs) for corrosion if the copper is black they may be high resistance . Testing the voltage pulse at the doors with a multimeter will not give an accurate result as it is too short a duration.

I think its the grounding wire for the filler neck/ emissions vapour seperator, It would be to discharge static , The filler neck etc is mostly suspended between the rubber grommit at the cap end a nbd the rubber hose at fuel tank.

Been a long time since I had one and the abs is a totally different system to my Disco 1. I think it is the ABS (wabco block) that is stopping that brake line check state oo all pipes between wheel and ABS you may have a bad leak that is causing ABS to block that port or the abs may be faulty.

Look for a crimped pipe between rear axle and the ABS unit then to that "block" it's a reduction valve.. Try loosening pipes forwards from axle and see if fluid comes out.There must be a blockage somewhere along the way.

Hi Thanks for reply, I know that they have connected the other modules to different pins and all the dongles do is "rewire" the data links. Still going through Rave to find them, but thought i'd try asking in case anyone has done work already. I have noticed my SRS light doesn't illuminate when...

I know this is a very old post, but do you have the pin outs for green or grey adapters so I can make my own. Purchased a hawkeye total but had 3 orders for dongles cancelled so far for unavailability.

Hi just got another Landrover after several years. Just aquired a Discovery 1 ES V8i import. In past had Rangerover classic 3.5Efi (later rebuilt to a Dakar buggy, Rangerover Vogue 3.9 and then Discovery 2 4.0 , this lost my interest in landrovers for a while( it turned out to be a badly...