Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. S

    Please read and help if u can

    sorry to hear of your bad luck hope u get on ok with your new engine . have you got it fitted yet? what is it out of?
  2. S

    My Project P38

    if the turbo spins freely and has very little wear(play) it should be ok.also you might be able to use the rr casing on the bmw turbo . if i remember i will check that tomorrow. about your broken release bearing , did you remove the bellhousing with the engine if you dont the fork will pull the...
  3. S

    range rover dse diesel pump

    people do it both ways i took down the tank it is a job that you are only going to be doing once so dont cut the floor as i have seen a p 38 that had the floor cut to fit a fuel pump and mice/rat went in and eat the wiring to make room
  4. S

    613 miles on diesel P38 - can you do better?

    im curious to know what the magnets on the fuel inlet and rack pipes do??
  5. S

    613 miles on diesel P38 - can you do better?

    600 miles on one tank :eek: mine wouldnt do it on a trailer ----
  6. S

    Can someone help me out?

    hi dopey hope u got sorted with air loss and hope u have a speedy recovery
  7. S

    Clutch problems

    those pins have a habit of shearing i did mine last year after my pedal went to the floor the pins were main dealer pins and i double pinned to be sure. all was good for about 3 weeks and pedal to the floor again so took it apart again new pins and a small touch of mig weld on both sides all...
  8. S

    Viscous Coupling

    thanks data the 3 amigo finally makes sense perfect sense :)
  9. S

    Viscous Coupling

    i notice you said you are having the ecu changed im just curious to know is the ecu married to becm and key,locks etc. Also what the hell is the 3 amigo issue ??
  10. S

    injector tips

    i have seen injector tips for sale in poland for (5.50 euro) each. waste of money or would they be good idea
  11. S

    new p38 owner and the trouble begins.....

    :mad: those fuse boxes are a pain i have had to replace 2 in the last 6 mts. pump relay is being pulled in for some reason. i dont think this will help "but" . inside the drivers door where the fuel cutoff switch is located there are wiring plugs in there that have a habit if getting wet and...
  12. S

    Diesel pump

    i did just you said i marked the top of the pump and the pump itself . i have a friend who said he could machine down the pump snout to have it fit . i would imagine that a bushing or adaptor of some type could be made to fit the engine with the large hole to accept the pump with the small snout
  13. S

    Diesel pump

    just reading back on what i wrote it looks like i was pi--ing on nathans batteries so nathan i am sorry i didnt mean to sound so loud :eek: sorry and thank you for your help :)
  14. S

    Diesel pump

    Nathan i have fitted 2 pumps where i have had to change the heads and had great results my own p38 being one example i have a fantastic hot and cold start i have fantastic power(for a p38) very good tickover and my emissions are very low. i dont think it could be better than that. i agree with...
  15. S

    Diesel pump

    the part no is NR 0 460 406 994
  16. S

    Diesel pump

    i will check the no. tomorrow the pump is out of a range rover
  17. S

    Fab News and another question!!

    as regards the brake pipes make them up yourself as you have the flaring tool its not a nice job to do but its not expensive
  18. S

    2.5 diesel warm starting - I hesitate to raise this issue again, but....

    it could be a combination of worn pump and worn timing gears and timing chain slightly stretched which retards your timing i had the same problem and i advanced the timing in my pump by loosening the pump and turning it very slightly it now starts first tip every time and it increased my power...
  19. S

    i have a good pump if you are interested i can fit it if you like

    i have a good pump if you are interested i can fit it if you like
  20. S

    Diesel pump

    nathan is correct about the hole size but if you can get a pump with the correct size hole the biggest problem you will have is changing the top of the pump . i have a secondhand pump in good working order with the correct electronic top (pump suitable for rangerover)
Back
Top