Search results

I cannot seem to find this section of the website but I appreciate you suggesting it.

I'm not going to waste time answering your questions when you can look it up yourself if it actually matters to you. You can just Google L322 diff ratios or look for a second hand L322 diff with the ratios that I have mentioned and see that they exist in the ratio that I have and other ratios...

The SC has an 8 speed gearbox. I think the 2.76 diffs are from a diesel L322. The oil was dark when I changed it but I have no reason to suspect that the internal diffs are not OK. But on my latest MOT they noted the rust on the diffs as a potential future issue. It's not just about the...

I am not the first person to modify a Range Rover to better suit their specific needs. In fact Range Rover changed from a five speed gearbox to a six speed gearbox to an eight speed gearbox. I don't see any problem with improving something beyond its initial design while other people might...

The guy that I bought the car off had died two years earlier and his widow sold it to me and she was German and barely spoke English. I have no idea what it was used for. I noticed many strange things with the car such as the rear right height sensor had broken on the arms and he had used cable...

I'm not dropping revs or running at higher revs. With my current differentials at 70mph on the motorway it runs at about 1,300 RPM. With the 2.76 diffs it will run at maybe 1,100 RPM. So a lower RPM for long trips. I would not put more stress on the rest of my system by it taking longer to...

If I cannot find out the details of the o-ring (if that is the correct solution) then I will probably have to use the sealant. As it is not leaking massively at the moment I can give it some time to see if someone has the answer. I will also contact some gearbox specialists to see if they know...

Sealant can mean any sealant including silicone. Gasket sealant is a special product designed to mimic a gasket. Therefore if there was a gasket there then it would mimic that gasket and achieve the same result. I don't know if it normally has an O-ring, because I am just going off an image...

Yes I have seen this and other diagrams and I have measured my suspension and every wheel arch is exactly 5 centimeters too high.

I cannot remove the solenoid and drive to my local friendly garage motor to get a new O-ring. So I would need to get the O-ring first and then take off the solenoid and put the O-ring on it and replace it. But I cannot find any information on what size O-ring it would be so I cannot order it in...

I have a 2002 4.4 Petrol L322 with front and rear diffs at the ratio 3.73, with the 5 speed ZF5HP gearbox. My front and rear diffs are badly rusted on the outside but I do not believe that they need to be changed. I plan to make a trip from England to Portugal and I was thinking to get two...

I have discovered that the previous owner of my L322 has most likely raised the height by 5cm by reprogramming the suspension offset. I can see this issue in my ride heights and in the offsets using my cheap OBD reader. My iCarSoft V2 allows me to see the offsets but I cannot reprogram them. My...

I have a 4.4 petrol 2002 L322. I changed the transfer case oil and found that it only had 1/3 the required amount. After that I noticed a leak that is most likely coming from the join between the solenoid and the transfer case. From images that I found online, it appears that the solenoid has a...

Definitely do not look. I was so concerned that I created an account here just to find out what it was. Thanks for your help.

It is not for memory seats. It is for cars without memory seats. It connects everything that you described in cars without memory.

Exactly. The plug is for cars without memory seats, so not for yours. Therefor unused in your car, and in mine.

I searched for C1392 and found a thread on another forum that solved the issue. I would not have found it without your help, thanks. The answer is in the attached image, it is a redundant plug for non memory seat models.

That picture is exactly what it is. I think the previous owner cut the cable tie and it has fallen down. Do you know what it is for, if anything?

New to commenting here, but I have been using the information here for about a year. I bought a 2002 L322 a year ago. Many things need fixing and I am doing them bit by bit. The previous owner had a habit of doing makeshift fixes that fail over time and I am picking up the pieces of that...