Search results

hi no it was removed complete, i have ordered a gen new one off ebay for £60 del should be here tomo so i'll try that and report back cheers

got mine from a breakers in brum if you need his number pm me, he seems to have a fair few parts

anyone with any advice on the above please??? cheers

one of my mates pipe was crusher either side so think also using cutters like the brigade use

just a warning that some s*** bags are going around cutting the cats off cars, happened to a few peeps i know with freelanders, others cars may be at risk but as freelanders and other 4x4 are higher thinks its an easier target, so be careful where you park and keep away from certain caravan sites:D

:D on way see you in half hr :D

wish a mod was available for this, would save a lot of probs

had a ka once and it lasted longer then the shed i have now :hysterically_laughi

:doh:Who ever came up with the hydraulic master cylinder on freelanders should be shot, what a stupid ****ed up way, what’s wrong with a cable from the pedal to the gear box :mad:

hello after removing the battery tray and several other parts out the way finally got to the bleed nipple, i followed joes instructions (thanks joe) the colour of the fluid thats in the bottle is black, so done it till it was running clear. tried the pedal and still nothing,pedal hit the...

ok great thanks for the advice will try it tomorrow cheers

ok great cheers for that info, as my clutch pedal in now against the floor with no pressure pushing it back up do you think bleeding with resolve this??? just on past cars the pedal feels spongy when air is in the lines. cheers again

hi joe having probs with my td4 clutch http://www.landyzone.co.uk/lz/f9/td4-clutch-floor-158080.html was going to have a go at bleeding it, is there a fill level in the res?? the lid/cap has a balloon thing on it do you have to suck the air out through the little hole on top or just refit...

thought these sealed units didnt need bleeding?? it came off one car to the other without opening the Master cylinder or losing fluid. if it was this would the pedal be stuck on the floor and not return?? cheers

hello some time ago you posted that a replacement Clutch Master cylinder might be available for a freelander td4, did you manage to find a metal one with a screw top??? do you mind if i ask you to forward any information you have on the replacement Clutch Master cylinder thanks in advance dean

hello few weeks ago my 54 reg td4 clutch pedal shoot up about 2" above the other pedels on checking the circlip that holds the rod to the pedal, i managed to put it all back and its been ok until few days ago when it popped back out and was hard going into gear, as a mate had just written off...

no just fixed the wire it did the trick well i thought it had lol

hello is that the one on side of injector rail?? i have had to fix the wires on that

hello thanks guys will try these, i have already replaced the crank case breather and the egr valve has been bypassed with a purchase of ebay, i have unpluged the maf and was the same so will look at intercooler hoses, where and how do i check variable vane mechanism on the turbo is free...

hello i have a 54 reg td4 with 65000 just serviced inc fuel filter and turbo filter few months now been runnung lumpy, sometimes its hard to start then a load of grey/blue smoke then its fine for a while ,, then whilst driving along at any speed it starts to pull back a little with...