Search results

.hi have you tried bleading brakes starting at back first.also have you given brakes time to bed in you could try swapping drums and shoes front to back matter of interest I have series2 with 11 inch drums on front master cylinder bore is22.2mm with servo assist this set up goes through mot...

have you tried changing the 2 brake pipes that come out of master round on my old 2a the front brakes are fed by the front port and the back brakes are fed from the back port from the safety angel do you have a brake failure valve fitted between front and rear brake lines so if one line leaks...

if after all the sugestions made don't work have you inspected drums with hgv you can get a situation where the drums become glazed or oval do you do any heavy towing which can get drums hot and eventualy they may become glazed

have you tried cranking engine over with all injector pips disconnected if it has a cav rotary pump they can some times be hard to prime

hi I also have a Salisbury front axel which I bought from army sale fully recond 12 years ago have you ever broken a front half shaft ? if so where did you get a replacement one from

to set master cylinder free play you need to push brake pedal gently by hand until you feel light resents which means brake push rod has touched master cylinder piston check with ruler it should be about half inch freplay as brakes have been overheated you should inspect all wheel cylinders to...

I think you should strip master cylinder to see if seals are swollen or perished as it may not be letting all pressure off when yoy release brake pedel when they, get hot try undoing brake pipe nut on master cylinder to see if this lets any pressure off

do all brake drums get hot or just the 2 front or 2 back ones I tak it you have a tandom master cylinder have you checked master cylinder to see if rubber seals are swollen or perished

have you any free play on pedel before it goes tight some years ago ihad same problem turned out to be an ovel brake drum graduley pmping up system also a partley internly collapsing brake hose may cause this problem

hi I have just started using computer more used to using spanners

hi jeff did yoy have any thing to do with scammel constructers tank transporters ihave recently rebuilt gate change in one of them regards 8ha

married 56 years same wife????

married with 2 grand children

hi iam a semi retired plant/hgv fitter

has any one fitted a standard shortened front prop shaft to a 8ha axel on a 90 land rover instead of a three instead of a three joint cardon one